AMPROBE PM55A CALIBRATION and AMPROBE PM55A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AMPROBE PM55A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   AMPROBE PM55A   Description / Specification:   Spec Sheet 
AMPROBE PM55A Pocket Multimeter with VolTect Non-Contact Voltage Detection

The Amprobe PM55A Pocket Multimeter with VolTect Non-Contact Voltage Detection is only 3/8” thick and less than 3 oz in weight with full functionality offering ac and dc voltage to 600 V, AC and DC current to 2000 µA, resistance to 6 Megohm, capacitance to 2000 µF, frequency to 30 kHz, diode test and continuity w/beeper. It also offers VolTect, a built-in, non-contact voltage detector for AC voltages. It automatically selects between AC voltage, DC voltage or resistance measurement based on the test point to which the leads are connected. Fully autoranging, this meter offers nine different measurement functions. Specifications. DC Voltage: 6.000 V ± (0.5 %+3 dgt), 60.00 V ± (1.0 %+5 dgt), 600 V (AutoTect Lo-Z) 2.0 %, 600 V (Hi-Z only) 1.5 % + 5 dgt. AC Voltage (50 Hz - 60 Hz): 6.000 V, 60.00 V, 600 V ± (1.5 %+5 dgt). Capacitance: 100.0 nF, 1000 nF, 10.0 µF, 100.0 µF, 2000 µF ± (3.5 %+6 dgt). Resistance: 600.0 ohm ± (2.0%+6 dgt), 6.000 Kohm ± (1.2%+6 dgt), 60.00 Kohm, 600.0 Kohm ± (1.0%+4 dgt), 6.000 Mohm ± (2.0%+4 dgt). Frequency: 10.00 Hz - 30.00 kHz ± (0.5 %+4 dgt) < 2 0 V Sine-rms, 10.00 Hz - 999.9 Hz ± (0.5 %+4 dgt) < 600 V Sine-rms. DC µA Current: 400.0 µA ± (1.5 %+3 dgt), 2000 µA ± (1.2 %+3 dgt). AC µA Current: 400.0 µA ± (2.0 %+3 dgt), 2000 µA ± (1.5 %+3 dgt). Diode Tester Test current: 0.48 mA. Display and update rate: 3-5/6 digits 6000 counts; Updates 5 per second nominal.



 

Standard Calibration $110.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AMPROBE PM55A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Line Regulation
Line regulation is the capability to maintain a constant output voltage level on the output channel of a power supply despite changes to the input voltage level.

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

RMS
RMS or root mean square is a statistical measure of the magnitude of a varying quantity

Please contact us for your AMPROBE PM55A CALIBRATION and/or AMPROBE PM55A Pocket Multimeter with VolTect Non-Contact Voltage Detection REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: