Keysight (Agilent) 33250A REPAIR and Keysight (Agilent) 33250A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 33250A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 33250A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our
 used Function Generator page or new Function Generator page

 
   Keysight (Agilent) 33250A   Description / Specification:    
Keysight (Agilent) 33250A Function/Arbitrary Waveform Generator

The Agilent 33250A provides a full-featured 80 MHz Function/Arbitrary waveform generator with 50 MHz pulse capabilities. It not only provides a wide variety of standard waveforms, but also arbitrary waveforms with 12-bit resolution, 64Kpoint deep memory, and a sample rate of 200 MSa/s. In addition, it has both linear and logarithmic sweep, burst, as well as internal and external AM, FM, and FSK modulation capabilities all in a half-width package. External clock reference allows multiple 33250A’s to be used with precise phase-offset signals, or with an external 10 MHz system clock. With GPIB and RS-232 provided standard, the 33250A is fully programmable, and perfectly suited for stand-alone bench and system applications. Waveforms; Standard: Sine, square, ramp/triangle, noise, sin(x)/x, exponential rise, exponential fall, cardiac, DC volts and Arbitrary (Waveform Length: 1 to 64K points. Amplitude Resolution: 12 bits (including sign). Sample Rate: 200 MSa/s. Non-Volatile Memory: Four (4) 64K waveforms). Frequency Characteristics; Sine: 1 µHz to 80 MHz. Square: 1 µHz to 80 MHz. Pulse: 500 µHz to 50 MHz. Arb: 1 µHz to 25 MHz. Ramp: 1 µHz to 1 MHz. Noise (Gaussian): 50 MHz bandwidth. Resolution: 1 µHz; except pulse, 5 digits. Accuracy Stability: ± 0.3 ppm, 18° C to 28° C. Accuracy Aging: ± 1 ppm per 1 year.



 

Standard Calibration $405.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 33250A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your Keysight (Agilent) 33250A REPAIR and/or Keysight (Agilent) 33250A Function/Arbitrary Waveform Generator CALIBRATION

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: