Keysight (Agilent) 3326A REPAIR and Keysight (Agilent) 3326A CALIBRATION

Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 3326A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 3326A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our
 used Function Generator page or new Function Generator page

   Keysight (Agilent) 3326A   Description / Specification:    
Keysight (Agilent) 3326A 2-Ch 13 MHz Synthesizer

The HP 3326A Two-Channel Synthesizer combines two independent synthesizers, flexible modulation, and control circuitry into a single, powerful package. This single instrument can provide precise phase offset, two-tone sweep, fast frequency switching, internal modulation, and pulse signals for bench or systems use. The HP 3326A can provide two signals whose phase is adjustable and calibrated anywhere in its 13 MHz frequency range without an external phase meter . Self-calibration can be performed internally or externally and yields accuracy of ±0.2 degrees below 100 kHz. Phase can be set with 0.01 degree resolution at all frequencies. Using its unique phase-calibration circuitry, calibrated multi-phase signals are easily achieved with two or more HP 3326As. Specifications. Operating Modes; Two Channel: Channels A and B are independent. Two-Phase: Channels A and B are the same frequency, with calibrated phase offset between the two signals. Two-Tone: Channel B frequency offset 0 to 100 kHz from channel A frequency. Pulse: Channel B is the complement of Channel A. Frequency (Waveforms are Sine, Square, Pulse, and DC); Range: 0 Hz to 13 MHz. Resolution: 1 µHz below 100 kHz, 1 mHz at and above 100 kHz. Stability: ±5 x I0^- 6/ year, 20°C to 30°C. Output Connectors: Front panel BNC female. Impedance: 50 ohm; output may be floated to ±42 V peak. Option 001, High Stability Frequency Reference. Option 002, High Voltage Output. Option 003, Rear Terminal Outputs.


Standard Calibration $270.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 3326A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your Keysight (Agilent) 3326A REPAIR and/or Keysight (Agilent) 3326A 2-Ch 13 MHz Synthesizer CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: