EXFO EPM-102 CALIBRATION and EXFO EPM-102 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO EPM-102 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Meter?
Shop for Comparable Products on our  used Optical Power Meter page or new Optical Power Meter page

 
   EXFO EPM-102   Description / Specification:    
EXFO EPM-102 FiberBasix Handheld Optical Power Meter

The Exfo EPM-102 FiberBasix Power Meter allows for the testing of passive optical networks (PONs) at 1310, 1490 and 1550 nm. It provides highly accurate power measurements, as well as reference value setting capabilities. What’s more, the Exfo EPM-102 requires no offset nulling, and it offers power autonomy of 300 hours, for reliable, long-lasting performance in the field. Specifications. Power meter port: Ge. Power range: 10 to -60 dBm. Range displayed: Down to –65. Number of calibrated wavelengths: Six, (850 nmm, 1300 nm, 1310 nm, 1490 nm, 1550 nm and 1625 nm.) Power uncertainty: ±5 % ± 1 nW. Resolution: 0.01 dB. Automatic offset nulling: Yes. Display units: dB/dBm/W. Screen refresh rate: 3 Hz. Battery life: > 300 hours (typical).



 

Standard Calibration $160.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO EPM-102. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chromatic Dispersion
Chromatic Dispersion is a broadening of the input signal as it travels down the length of the fiber. Chromatic Dispersion results from a variation in propagation delay with wavelength, and is affected by fiber materials and dimensions.

Detector
A Detector is a signal conversion device that converts power from one form to another, such as from optical power to electrical power

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Polarization Mode Dispersion (PMD)
Polarization mode dispersion (PMD) is a form of modal dispersion where two different polarizations of light in a waveguide, which normally travel at the same speed, travel at different speeds due to random imperfections and asymmetries, causing random spreading of optical pulses. It is he difference between the maximum and minimum values of loss typically measured in ps/km^1/2.

Please contact us for your EXFO EPM-102 CALIBRATION and/or EXFO EPM-102 FiberBasix Handheld Optical Power Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: