ANRITSU MS2711E CALIBRATION and ANRITSU MS2711E REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2711E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ANRITSU MS2711E   Description / Specification:   Spec Sheet 
ANRITSU MS2711E 9 kHz to 3 GHz Spectrum Master Handheld Spectrum Analyzer

The Anritsu MS2711E 9 kHz to 3 GHz Spectrum Master Compact Handheld Spectrum Analyzer is used for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument for making fast and reliable measurements. Specifications. Frequency Range: 9 kHz to 3 GHz (tunable to 0 Hz). Tuning Resolution: 1 Hz. Frequency Reference Aging: ± 1.0 ppm/year, Accuracy ± 1.5 ppm (25 °C ± 25 °C) + aging, < ± 50 ppb with GPS On. Frequency Span: 10 Hz to 3 GHz including zero span. Sweep Time: Minimum 100 ms, 10 µs to 600 s in zero span. Sweep Time Accuracy: ± 2 % in zero span. Resolution Bandwidth (RBW): 100 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth). Video Bandwidth (VBW): 10 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable). RBW with Quasi-Peak Detection: 200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth). VBW with Quasi-Peak Detection: Auto VBW is On, RBW/VBW = 1. Dynamic Range: > 85 dB (2.4 GHz), 2/3 (TOI-DANL) in 100 Hz RBW. Measurement Range: DANL to +26 dBm (>= 50 MHz), DANL to 0 dBm (< 50 MHz). Display Range: 1 dB to 15 dB/div in 1 dB steps, ten divisions displayed. Reference Level Range: –120 dBm to +30 dBm. Attenuator Range: 0 dB to 55 dB in 5 dB steps. Maximum Continuous Input: +30 dBm. Phase Noise: –90 dBc/Hz max @ 10 kHz offset at 1 GHz. Store 2000 Traces internally. Display Size: 8.4 inch daylight viewable color LCD. Options. 0008, Preamplifier. 0020, Tracking Generator. 0031, GPS Receiver (requires Antenna). 0019, High-Accuracy Power Meter (requires External Power Sensor). 0029, Power Meter. 0025, Interference Analyzer (Option 0031 recommended). 0027, Channel Scanner. 0444, EMF Measurements (requires Anritsu Isotropic Antenna). 0509, AM/FM/PM Analyzer.



 

Standard Calibration $655.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS2711E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your ANRITSU MS2711E CALIBRATION and/or ANRITSU MS2711E 9 kHz to 3 GHz Spectrum Master Handheld Spectrum Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: