ANRITSU MS2712E CALIBRATION and ANRITSU MS2712E REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2712E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ANRITSU MS2712E   Description / Specification:   Spec Sheet 
ANRITSU MS2712E 9 kHz to 4 GHz Spectrum Master Handheld Spectrum Analyzer

The Anritsu MS2712E 9 kHz to 4 GHz Spectrum Master Compact Handheld Spectrum Analyzer is used for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument for making fast and reliable measurements. Specifications. Frequency Range: 9 kHz to 4 GHz (tunable to 0 Hz). Tuning Resolution: 1 Hz. Frequency Reference Aging: ± 1.0 ppm/year, Accuracy ± 1.5 ppm (25 °C ± 25 °C) + aging, < ± 50 ppb with GPS On. Frequency Span: 10 Hz to 4 GHz including zero span. Sweep Time: Minimum 100 ms, 10 µs to 600 s in zero span. Sweep Time Accuracy: ± 2 % in zero span. Resolution Bandwidth (RBW): 100 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth). Video Bandwidth (VBW): 10 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable). RBW with Quasi-Peak Detection: 200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth). VBW with Quasi-Peak Detection: Auto VBW is On, RBW/VBW = 1. Dynamic Range: > 102 dB (2.4 GHz), 2/3 (TOI-DANL) in 1 Hz RBW. Measurement Range: DANL to +26 dBm (= 50 MHz), DANL to 0 dBm (< 50 MHz). Display Range: 1 dB to 15 dB/div in 1 dB steps, ten divisions displayed. Reference Level Range: –120 dBm to +30 dBm. Attenuator Range: 0 dB to 55 dB in 5 dB steps. Maximum Continuous Input: +30 dBm. Phase Noise: –100 dBc/Hz max @ 10 kHz offset at 1 GHz. Display Size: 8.4 inch daylight viewable color LCD. Options. 0010, Bias-Tee. 0009, 20 MHz Bandwidth Demod. 0019, High-Accuracy Power Meter (requires External Power Sensor). 0020, Tracking Generator. 0027, Channel Scanner. 0025, Interference Analyzer (Option 0031 recommended). 0029, Power Meter. 0031, GPS Receiver (requires Antenna). 0090, Gated Sweep. 0444, EMF Measurements (requires Anritsu Isotropic Antenna). 0509, AM/FM/PM Analyzer.



 

Standard Calibration $550.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS2712E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).


Please contact us for your ANRITSU MS2712E CALIBRATION and/or ANRITSU MS2712E 9 kHz to 4 GHz Spectrum Master Handheld Spectrum Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: