KAELUS IPA-1900A CALIBRATION and KAELUS IPA-1900A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KAELUS IPA-1900A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   KAELUS IPA-1900A   Description / Specification:    
KAELUS IPA-1900A PCS1900 Passive Intermodulation (PIM) analyzer

The Kaelus iPA-1900A Passive Intermodulation (PIM) analyzer is the first battery powered PIM Test Analyzer versatile enough to support multiple test scenarios such as testing at the top of the tower, base of tower, roof top and in-building for DAS systems. This IEC compliant 20W, rugged, battery operated design includes an iPad Mini for remote control, hands-free dynamic testing scenario that is safe and convenient. Add the optional Range to Fault (RTF) Module to quickly identify the location of PIM and Return Loss sources.
Specifications.

System;
Measurement method: Reverse (reflected) PIM, 3rd and 5th order.
Residual PIM: < -117dBm/-160dBc maximum (<-125dBm/-168dBc typical) (x2 @ 43dBm).
Interface ports:
  1x RF output (7-16 DIN female),
  1x USB 2.0 Host, 1x USB 2.0 Slave,
  1x SD,
  1x monitor port (SMA female),
  1x SMA-RP (Wi-Fi external antenna).
User interface:
  Local - touch screen display 4.3in (109mm),
  Remote - iPad Mini Wi-Fi (included), any user device Wi-Fi and Web browser.
Return loss alarm: Automatic detection and shut down when high RL is detected.

Transmitter;
Transmit frequencies: 1930-1937 MHz (TX1), 1965-1990 MHz (TX2).
Frequency increment: 100kHz.
Frequency accuracy: ± 5ppm maximum, aging ± 1ppm maximum after first year.
Power per tone (adjustable): 0.1 to 20W (+20 to +43dBm in 1dB increments).
Power accuracy (per tone): ± 0.5dB maximum.

Receiver;
Receive band (100kHz steps): 1855-1880 MHz.
Measurement noise floor: < -128dBm.
Measurement range: -50dBm to -128dBm.



 

Standard Calibration $600.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KAELUS IPA-1900A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.


Please contact us for your KAELUS IPA-1900A CALIBRATION and/or KAELUS IPA-1900A PCS1900 Passive Intermodulation (PIM) analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: