KAELUS IPA-0850A CALIBRATION and KAELUS IPA-0850A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KAELUS IPA-0850A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   KAELUS IPA-0850A   Description / Specification:    
KAELUS IPA-0850A 850 MHz Passive Intermodulation (PIM) analyzer

The Kaelus iPA-850A Passive Intermodulation (PIM) analyzer is the first battery powered PIM Test Analyzer versatile enough to support multiple test scenarios such as testing at the top of the tower, base of tower, roof top and in-building for DAS systems. This IEC compliant 20W, rugged, battery operated design can be operated via remote control with any WiFi enabled phone, tablet or laptop computer. This allows hands-free dynamic testing that is safe and convenient. Add the optional Range to Fault (RTF) module to quickly identify the location of PIM and Return Loss sources. An intuitive touch screen interface is also available for local control, performing tests and quickly generating site reports.
Specifications.

System;
Measurement method: Reverse (reflected) PIM, 3rd and 5th order.
Residual PIM: < -117dBm/-160dBc maximum (<-125dBm/-168dBc typical) at 2 x 20W.
Interface ports:
  1x RF output (7-16 DIN female),
  1x USB 2.0 Host, 1x USB 2.0 Slave,
  1x SD,
  1x monitor port (SMB female),
  1x SMA-RP (Wi-Fi external antenna).
User interface:
  Local - touch screen display 4.3in (109mm),
  Remote - tablet, computer, any Wi-Fi enabled user device with web browser.
Return loss alarm: Automatic detection and shut down when high RL is detected.

Transmitter;
Transmit frequencies: 869 MHz (TX1), 879-894 MHz (TX2).
Frequency increment: 100kHz.
Frequency accuracy: ± 5ppm maximum, aging ± 1ppm maximum after first year.
Power per tone (adjustable): 0.1 to 20W (+20 to +43dBm in 1dB increments).
Power accuracy (per tone): ± 0.5dB maximum.

Receiver;
Receive band (100kHz steps): 824-849 MHz.
Measurement noise floor: < -128dBm.
Measurement range: -50dBm to -128dBm.



 

Standard Calibration $715.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KAELUS IPA-0850A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Accuracy
Accuracy is the degree of closeness of measurements of a quantity to that quantity's actual (true) value.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Receiver Sensitivity
Receiver Sensitivity is the optical power required by a receiver for low error signal transmission. In the case of digital signal transmission, the mean optical power is usually quoted in Watts or dBm (decibels referred to 1 milliwatt).

Please contact us for your KAELUS IPA-0850A CALIBRATION and/or KAELUS IPA-0850A 850 MHz Passive Intermodulation (PIM) analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: