ANRITSU MS4647B CALIBRATION and ANRITSU MS4647B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS4647B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   ANRITSU MS4647B   Description / Specification:   Spec Sheet 
ANRITSU MS4647B 70 GHz VectorStar Vector Network Analyzer

The Anritsu MS4647B 70 GHz VectorStar Vector Network Analyzer provides the highest overall performance on a modern platform. The MS4647B VectorStar VNA offers the broadest coverage in a single instrument, 10 MHz to 70 GHz (70 kHz Low-End Frequency Extension optional). IMDView™ provides active menu sidebar with real time measurement display while modifying critical IMD parameters. The internal combiner option offers single connection testing of active devices for automatically switching between S parameter and IMD measurements without the need for reconnecting the DUT. PulseView™, when combined with the innovative IF digitizing option, offers industry-leading 2.5 ns pulse resolution and 100 dB dynamic range with no compromises or trade-offs due to varying duty cycles. PulseView provides real time display of pulse measurements while dynamically modifying pulse parameters for immediate design validation. DifferentialView™, when combined with the dual internal source option, offers real time display analysis of differential devices, drivers, and components while actively modifying phase and magnitude relationships of the internal dual sources. The noise figure option is based on a cold source technique for improved noise figure measurement accuracy. VectorStar is the only VNA platform capable of measuring noise figure from 70 kHz to 125 GHz and available with an optimized noise receiver for measurements from 30 GHz to 125 GHz. Specifications. Operating Frequency: 10 MHz to 70.5 GHz. Maximum System Dynamic Range, Standard: 116 dB, > 20 to 38 GHz. Maximum Receiver Dynamic Range, Standard: 120 dB, > 0.01 to 50 GHz. Maximum Receiver Compression, Standard: +10 dBm, > 0.3 MHz to 70 GHz. Noise Floor Standard: -110 dBm, > 0.01 to 70 GHz. Power Range Standard: +12 to –25, 0.01 to 2.5 GHz. Power Accuracy: ± 1.5 dB, > 0.01 to 40 GHz. Power Linearity: ± 1.0 dB, > 0.01 to 40 GHz. Power Resolution: 0.01 dB, 70 kHz to 70 GHz. Options. 002 - Time Domain with advanced capabilities. 007 - Receiver Offset with Multiple Source Control for frequency-translated measurements. 031 - Second Source. 032 - Internal Combiner. 035 - IF Digitizer. 041 - Noise Figure. 042 - PulseView™. 043 - DifferentialView™. 044 - IMDView™. 051 - Direct Access Loops for total measurement flexibility. 061 - Active Measurement Suites with 2 attenuators. 062 - Active Measurement Suites with 4 attenuators. 070 - 70 kHz Low-end Frequency Extension for an unprecedented frequency coverage. 081 - Broadband/Milllimeter Wave Interface.



 

Standard Calibration $925.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS4647B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.


Please contact us for your ANRITSU MS4647B CALIBRATION and/or ANRITSU MS4647B 70 GHz VectorStar Vector Network Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: