Keysight (Agilent) 3455A REPAIR and Keysight (Agilent) 3455A CALIBRATION

The Keysight (Agilent) 3455A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 3455A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 3455A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

   Keysight (Agilent) 3455A   Description / Specification:    
Keysight (Agilent) 3455A Digital Integrating Voltmeter

The HP 3455A Digital Voltmeter is a 5 1/2 or 6 1/2 digit integrating voltmeter for bench or systems applications. The standard instrument measures dc volts, ac volts, and resistance. HP-IB and auto or manual ranging are also standard. The HP 3455A is fully guarded and has greater than 60 dB normal mode noise rejection at reading rates of up to 24 readings per second on all dc ranges. Ohms reading rates are up to 12 readings / second and an ac fast mode gives reading rates of up to 13 readings / second at frequencies above 300 Hz. (Readings/ second given for 60 Hz operation and high resolution off.) DC measurements can be made with up to 1 uV sensitivity. Ohms measurements are made with either a 2-wire and 4-wire mode. The High Resolution (6 1/2 -digit) mode gives dc and ohms measurements with greater than 1 part per million resolution. The standard true rms ac to dc converter measures sinusoid and complex signals with crest factors up to 7:1 at full scale from 30 Hz to 1 MHz. Specifications. DC Voltage Accuracy: ± (% of reading + counts). DC Voltage Input resistance: 0.1 V through 10 V range: > 10^10 ohms. 100 V and 1000 V range: 10 megohm ± 0.1% with Auto Cal. "off." Maximum Input Voltage: High to low input terminals: ± 1000 V peak; Guard to chassis: ± 500 V peak; Guard to low terminal: ± 200 V peak. AC Voltage (rms converter) Input Impedance: Front terminals: 2 M-ohm ± 1 % shunted by less than 105 pf. Rear terminals: 2 M-ohm ± 1 % shunted by less than 90 pf. Maximum Input ac Voltage: High to low terminals: ± 1400 volts peak ; 10^7 VHz max. Guard to chassis: ±500 V peak; Guard to low terminal: ±200 V peak. Crest factor: 7:1 at full scale. AC Accuracy: [± % of reading + counts] (ac coupled). Resistance Accuracy ± (% of reading + counts) 4-wire k-ohm. Options. 001: average converter


Standard Calibration $105.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 3455A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your Keysight (Agilent) 3455A REPAIR and/or Keysight (Agilent) 3455A Digital Integrating Voltmeter CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: