Keysight (Agilent) E5270B CALIBRATION and Keysight (Agilent) E5270B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E5270B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another General Meter?
Shop for Comparable Products on our
 used General Meter page

 
   Keysight (Agilent) E5270B   Description / Specification:    
Keysight (Agilent) E5270B Precision IV Analyzer/8 Slot Precision Measurement Mainframe

The Agilent E5270B Precision IV Analyzer is the complete solution for current-voltage characterization of a wide range of materials and devices. The E5270B supports multiple SMUs (Source/Monitor Units) for voltage/current sourcing and voltage/current measurement with the best in the class current measurement performance as low as 0.1 fA. Its modular architecture allows you to configure or upgrade SMU modules for available eight slots. The EasyEXPERT group+ GUI based characterization software is furnished and available on your PC to support all the tasks required in the characterization from the measurement setup to the data analysis. Powerful integration of SMU’s versatile measurement capabilities and GUI based characterization software makes the E5270B the best solution for characterization and evaluation of devices, materials, semiconductors, active/passive components, or virtually any other type of electronic device with uncompromised measurement reliability and efficiency.
Specifications.

Maximum output power: The total module power consumption cannot exceed 80 W.
Maximum voltage between common and ground: ≤ ± 42 V.

Pulse measurement.
Pulse width: 500 μsec to 2 s.
Pulse period: 5 ms to 5 s.
Period: ≥ width + 2 ms (when width ≤ 100 ms).
Period: ≥ width + 10 ms (when width > 100 ms).
Pulse resolution: 100 μs.

Ground unit (GNDU).
The GNDU is furnished with the E5270B mainframe.
Output voltage: 0 V ± 100 μV.
Maximum sink current: 4 A.
Output terminal/connection: Triaxial connector, Kelvin (remote sensing).



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output


Please contact us for your Keysight (Agilent) E5270B CALIBRATION and/or Keysight (Agilent) E5270B Precision IV Analyzer/8 Slot Precision Measurement Mainframe REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: