Keysight (Agilent) 34450A CALIBRATION and Keysight (Agilent) 34450A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 34450A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

 
   Keysight (Agilent) 34450A   Description / Specification:   Spec Sheet 
Keysight (Agilent) 34450A 5.5 Digit Dual Display, Benchtop DMM

The Keysight 34450A Benchtop DMM provides a wide range of measurement functions such as DC voltage, DC current, True RMS AC voltage and AC current, 2-wire and 4-wire resistance, frequency, diode test, continuity, capaci­tance and temperature. With up to 50,000 memory points, you can capture and log up to 14 hours of data. Built-in with histogram and basic statistical functions, allow you to do simple data analysis within the unit itself. Multiple connectivity options such as USB 2.0, Serial Interface (RS-232) and GPIB port provides greater flexibility to connect DMM to a PC for data access and retrieval for analysis.
DC specifications
DC voltage Ranges: 100.000 mV, 1.00000 V, 10.0000 V, 100.000 V, 1000.00 V.
Resistance (2-wire)/ (4-wire) Ranges: 100.000 Ω, 1.00000 kΩ, 10.0000 kΩ, 100.000 kΩ, 1.00000 MΩ, 10.0000 MΩ, 100.000 MΩ.
DC current Ranges: 100.000 μA, 1.00000 mA, 10.0000 mA, 100.000 mA, 1.00000 A, 10.0000 A.
Continuity Range: 1000 Ω.
Diode test: 1.0000 V.

AC specifications
True RMS AC voltage Ranges: 100.000 mV, 1.00000 V to 750.00 V.
True RMS AC current Range: 10.0000 mA to 10.0000 A.
Frequency Ranges: 20 Hz to 300 kHz (100.000 mV to 750.00 V), 10.0000 mA to 10.0000 A (20 Hz - 10 kHz).

Temperature and capacitance specifications
Temperature Ranges: - 80.0 °C to 150 °C, - 110.0 °F to 300.0 °F
Capacitance Ranges: 1.000 nF, 10.00 nF, 100.0 nF, 1.0000 μF, 10.000 μF, 100.00 μF, 1000.0 μF, 10,000 μF.



 

Standard Calibration $120.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 34450A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your Keysight (Agilent) 34450A CALIBRATION and/or Keysight (Agilent) 34450A 5.5 Digit Dual Display, Benchtop DMM REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: