JDSU DSAM-2600 CALIBRATION and JDSU DSAM-2600 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the JDSU DSAM-2600 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   JDSU DSAM-2600   Description / Specification:   Spec Sheet 
JDSU DSAM-2600 Digital Service Activation Meter

The DSAM-2600 Digital Service Activation Meter is a lightweight, durable, handheld meter for installation and troubleshooting. It features an intuitive graphical interface complete with an informative online help system.
The DSAM-2600 provides traditional SLM test functions of analog video and audio levels and digital power levels. The video auto-test feature allows administrators to pre-program a test plan for multiple channels that a field technician can execute consistently with a single test selection. Additional features include a tilt screen and the Mini-scan feature; a simple one-key test that shows a summary of 1 to 12 channels. The DSAM-2600 contains ALL the benefits of the DSAM-1500 plus the addition of full DOCSIS® Service Verification and IP Performance tests with TruPacketTM.
Specifications.
Frequency.
Range: 4 to 1,000 MHz.
Accuracy: ±10 ppm at 25° C (77° F).
Tuning Resolution:
 Analog 10 kHz,
 Digital 50 kHz.
Channel Bandwidth:
 Models ending in A, 8 MHz,
 Models ending in B, 6 MHz.
Analog Level Measurement.
Signal Types: CW, video and audio (NTSC, PAL, and SECAM).
Range: -40 to +60 dBmV (typical).
Resolution: 0.1 dB.
Resolution Bandwidth: 280 kHz.
Accuracy: ± 1.5 dB typical at 25° C (77° F).
Digital Level Measurement.
Modulation Types: QPR, QPSK, QAM (DVB/ACTS).
Range: -40 to +50 dBmV (typical).
Resolution: 0.1 dB.
Resolution Bandwidth: 280 kHz.
Accuracy: ± 2.0 dB typical at 25° C (77° F).
Upstream Spectrum (Ingress Scan).
Spans:
 Models ending in A, 4 to 65 MHz,
 Models ending in B, 4 to 45 MHz.
Sweep Rate: Less than 2 seconds.
Display Scaling and Range: 5 and 10 dB/division; 6 vertical divisions.
Resolution Bandwidth: 280 kHz.
Sensitivity: -40 to +60 dBmV (typical).



 

Standard Calibration $475.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the JDSU DSAM-2600. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

POS
Packet over SONET/SDH (POS), is a communications protocol for transmitting packets in the form of the Point to Point Protocol (PPP) over SDH or SONET, which are both standard protocols for communicating digital information using lasers or light emitting diodes (LEDs) over optical fibre at high line rates.

TDMA: Time Division Multiple Access
Time Division Multiple Access (TDMA) is a method of sharing a communications carrier by assigning separate time slots to individual users. A channel is defined by a carrier frequency and time slot.

Please contact us for your JDSU DSAM-2600 CALIBRATION and/or JDSU DSAM-2600 Digital Service Activation Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: