ANRITSU MT1810A CALIBRATION and ANRITSU MT1810A REPAIR
The ANRITSU MT1810A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MT1810A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Bit Error Rate Tester (BERT)?
Shop for Comparable Products on our  used Bit Error Rate Tester (BERT) page or new Bit Error Rate Tester (BERT) page

 
   ANRITSU MT1810A   Description / Specification:    
ANRITSU MT1810A 4 Slot Chassis Mainframe

The Anritsu MT1810A mainframe can hold up to four plug-in modules to support research, development and production of module devices for the optical communication market or interconnection within a Gbit/s class high-speed device. It is a useful for research and development for the next-generation communication market, including optical packet transmission. The MU181020A 12.5 Gbit/s PPG and MU181040A 12.5 Gbit/s ED, among the installable modules, the number of controllable modules can be increased to 2 or 4 by selecting an optimal option to the MT1810A. As a way of reducing cost, the display and control parts have been omitted from the MT1810A, which is then controlled by the MX180000A Signal Quality Analyzer Control Software installed in the external control PC. Remote control by the control PC can also be performed via the GPIB or LAN interface.

Options installed at shipment.
x14, 2-slot for PPG and/or ED; enables control of 2 units of the MU181020A 12.5 Gbit/s PPG or MU181040A 12.5 Gbit/s ED in total.
x15, 4-slot for PPG and/or ED; enables control of 4 units of the MU181020A 12.5 Gbit/s PPG or MU181040A 12.5 Gbit/s ED in total.
032, 32Gbit/s PPG and/or ED Support; enables control of 4 units of the MU183020A 28G/32Gbit/s PPG, MU183021A 28G/32Gbit/s 4ch PPG, MU183040A 28G/32Gbit/s ED, or MU183041A 28G/32Gbit/s 4ch ED in total.



 

Standard Calibration $270.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MT1810A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your ANRITSU MT1810A CALIBRATION and/or ANRITSU MT1810A 4 Slot Chassis Mainframe REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: