CUSTOM-CAL CC50-3.5-8 CALIBRATION and CUSTOM-CAL CC50-3.5-8 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the CUSTOM-CAL CC50-3.5-8 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibration / Verification Kits? Shop for Comparable Products on our   new Calibration / Verification Kits page

 
For Sale New, List Price $2,950.00   CUSTOM-CAL CC50-3.5-8   Description / Specification:    
CUSTOM-CAL CC50-3.5-8 50 ohm 8.5 GHz 3.5 mm Calibration Kit

The Custom-Cal CC50-3.5-8 is a 50 Ohm, DC to 8.5 GHz, 3.5 mm-type Standard Calibration Kit. It consists of a; CC-5001-OF Open Female Connector, CC-5001-OM Open Male Connector, CC-5001-SF Short Female Connector, CC-5001-SM Short Male Connector, CC-5001-LF Load Female Connector, CC-5001-LM Load Male Connector, CC-5001-TF Through Female to Female Connector, CC-5001-TM Through Male to Male Connector, 7mm flat wrench and a 8710-1765CC 8 in-lbs [0.9 N.m] Break-Over Torque Wrench.
Specifications.
Open Female Connector.
Frequency Range: DC to 8500 MHz.
Impedance: 50 Ω.
Phase (DC to 3000 MHz): 0.8 degree.
Phase (3001 to 8500 MHz): 1.2 degree.
Open Male Connector.
Frequency Range: DC to 8500 MHz.
Impedance: 50 Ω.
Phase (DC to 3000 MHz): 0.8 degree.
Phase (3001 to 8500 MHz): 1.2 degree.
Short Female Connector.
Frequency Range: DC to 8500 MHz.
Impedance: 50 Ω.
Phase (DC to 3000 MHz): 0.8 degree.
Phase (3001 to 8500 MHz): 1 degree.
Short Male Connector.
Frequency Range: DC to 8500 MHz.
Impedance: 50 Ω.
Phase (DC to 3000 MHz): 0.8 degree.
Phase (3001 to 8500 MHz): 1 degree.
Load Female Connector.
Frequency Range: DC to 8500 MHz.
Impedance: 50 Ω.
Return Loss (DC to 3000 MHz): 40 dB minimum.
Return Loss (3001 to 8500 MHz): 36 dB minimum.
Load Male Connector.
Frequency Range: DC to 8500 MHz.
Impedance: 50 Ω.
Return Loss (DC to 3000 MHz): 40 dB minimum.
Return Loss (3001 to 8500 MHz): 36 dB minimum.
Through Female Connector.
Frequency Range: DC to 8500 MHz.
Impedance: 50 Ω.
Insertion Loss (DC to 8500 MHz): 0.2 dB maximum.
Return Loss (DC to 8500 MHz): 30 dB minimum.
Through Male Connector.
Frequency Range: DC to 8500 MHz.
Impedance: 50 Ω.
Insertion Loss (DC to 8500 MHz): 0.2 dB maximum.
Return Loss (DC to 8500 MHz): 30 dB minimum.



 

Standard Calibration $810.00 *
*This is a Web introductory price for one calibration of the CUSTOM-CAL CC50-3.5-8. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your CUSTOM-CAL CC50-3.5-8 CALIBRATION and/or CUSTOM-CAL CC50-3.5-8 50 ohm 8.5 GHz 3.5 mm Calibration Kit REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: