ANRITSU MP2101A CALIBRATION and ANRITSU MP2101A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MP2101A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Bit Error Rate Tester (BERT)?
Shop for Comparable Products on our  used Bit Error Rate Tester (BERT) page or new Bit Error Rate Tester (BERT) page

 
   ANRITSU MP2101A   Description / Specification:    
ANRITSU MP2101A BERTWave PE, BERT

The Anritsu MP2101A BERTWave PE is a BER tester supporting 125 Mbit/s to 12.5 Gbit/s. The BERT function supports bit rate from 125 Mbit/s to 12.5 Gbit/s (with Option-090) for evaluating devices and application supporting STM-1, 10 GFC and etc…
Specifications.

PPG.
Internal Reference Clock Accuracy: ±10 ppm Offset Variability: ±100 ppm, 1 ppm step.
Data Output Amplitude: Variable 0.1 Vp-p to 0.8 Vp-p, 10 mV step, AC coupled.
Data Output Amplitude Accuracy: ±20 mV ±20% for settings.
Test Pattern PRBS: 27 - 1, 29 - 1, 215 - 1, 223 - 1, 231 - 1 (Invert ON/OFF).
Test Pattern User Data: 1.3 Mbits (Editable Text File, Presence Sample File).

ED.
Offset Capacity: ±100 ppm.
Electrical Data Input 0.1 Vp-p to 0.8 Vp-p, DC coupled: 8.5 Gbit/s to 11.32 Gbit/s and 1/N bit rate above (10.3125 Gbit/s, single-ended 0.1 Vp-p, loopback, PRBS31, mark ratio 1/2, 20° to 30°C, BER <1E-12)
Test Pattern PRBS: 27 - 1, 29 - 1, 215 - 1, 223 - 1, 231 - 1 (Invert ON/OFF).
Test Pattern User Data: 1.3 Mbits (Editable Text File, Presence Sample File).

BERT.
External 10 MHz Input Connector;
Amplitude: 0.7 Vp-p to 2 Vp-p, AC coupled.
Connector: BNC connector, 50 Ω.
Waveform: Square or Sine wave.

External Reference Clock Input;
External: 1/16 Clock Input.
Amplitude: 0.2 Vp-p to 1.5 Vp-p, AC coupled.
Connector: SMA connector, 50 Ω.
Waveform: Square or Sine wave.

Options.
-011, 1CH PPG/ED.
-012, 2CH PPG/ED.
-030, GPIB.
-050, XFP Slot.
-051, SFP+ Slot.
-052, Full Rate Clock Output.
-090, Bit Rate Extension for PPG/ED.
-091, ED High Sensitivity.



 

Standard Calibration $1,340.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MP2101A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Accuracy
Accuracy is the degree of closeness of measurements of a quantity to that quantity's actual (true) value.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Receiver Sensitivity
Receiver Sensitivity is the optical power required by a receiver for low error signal transmission. In the case of digital signal transmission, the mean optical power is usually quoted in Watts or dBm (decibels referred to 1 milliwatt).

Please contact us for your ANRITSU MP2101A CALIBRATION and/or ANRITSU MP2101A BERTWave PE, BERT REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: