A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the MEGGER MIT40X-EN Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.


   MEGGER MIT40X-EN   Description / Specification:    
MEGGER MIT40X-EN 10-100V Insulation and Continuity Tester

The Megger MIT40X-EN insulation and continuity tester offers those working in electrical engineering, the electrical supply industry and in maintenance, repair and servicing of industrial equipment and manufacturing processes a convenient test instrument.

Nominal test voltages: 10 V to 100 V variable (1 V increments).
Range full scale accuracy: All ranges ±2% ±2 digits up to 100 MΩ.
Short circuit current: 2 mA +0% -50%.
Terminal voltage: -0% +20% ±1 V (Ii <1 mA).
Test current on load: 1 mA at min. pass value of insulation specified in BS7671, HD384 and IEC364, EN61152-2, 2 mA max.
EN61557 operating range: 0,10 MΩ to 1,00 GΩ.
Leakage current range: 10 μA to 2000 μA.
Leakage current: 10% ±3 digits.
Voltage display: 3% ±3 digits ±0.5% of rated voltage.
Polarization Index (PI): 10 min / 1 minute ratio.
Dielectric absorption Ratio (DAR): 60 sec / 30 sec ratio.

EN61557 operating range: 0, 01 Ω to 99, 9 Ω (0 to 100 Ω on analogue scale).
Accuracy: ± 2% ± 2 digits (0 to 100 Ω).
Open circuit voltage: 5 V ± 1 V.
Test current: 205 mA (±5 mA) (0.01 Ω to 9.99 Ω), 20 mA (±1 mA) (10.0 Ω to 99.9 Ω).
Zero offset at probe tips: 0, 10 Ω typical.
Lead resistance zeroing: Up to 9, 99 Ω.
Buzzer: Variable limit 1 Ω, 2 Ω, 5 Ω, 10 Ω, 20 Ω.

EN61557 operating range: 0, 01 k Ω to 1000 k Ω (0 to 1 M Ω on analogue scale).
Accuracy: ±3% up to 50 k Ω then ±5% ±2 digits.
Open circuit voltage: 5 V ±1 V.
Short circuit current: 1.5 mA ±0.2 mA.

Voltage range.
0 to 600 V d.c. ± 2% ± 2 digits.
10 mV to 600 V TRMS sinusoidal (40 - 400 Hz) ±2% ±2 digits.

Default Voltmeter.
Operates at >25 volts a.c. or d.c., on any range except OFF.
Frequency: 15-400Hz (15Hz - 99,9Hz) ±0.5% ±1 digit (100Hz to 400Hz).


Standard Calibration $175.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the MEGGER MIT40X-EN. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your MEGGER MIT40X-EN CALIBRATION and/or MEGGER MIT40X-EN 10-100V Insulation and Continuity Tester REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: