CCI PIMPRO 1921RM CALIBRATION and CCI PIMPRO 1921RM REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the CCI PIMPRO 1921RM Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   CCI PIMPRO 1921RM (PIMPRO-1921RM)   Description / Specification:   Spec Sheet 
CCI PIMPRO 1921RM PCS 1900, AWS 2100 PIM Analyzer

The CCI PiMPro 1921Rm is a Rack Mount precision Passive Intermod (PIM) analyzer that has been designed to meet the specific challenges of PIM testing both in laboratory and production environments. It covers both the 1850-1990 MHz and 1710-2155 MHz bands. The analyzer delivers maximum power of two carriers at 40 watts (40W x 2) and accuracy of intermodulation (IM) measurements, with a sensitivity of -125 dBm( -168 dBc at 20 watts). In a convenient 19 inch rack mount configuration. The PiMPro provides precise measurement of the 3rd, 5th, 7th and 9th order of intermodulation of any system or component under high-power conditions. In addition to passive intermodulation measurements, the unit will provide VSWR and Return Loss values.

Band: PCS 1900 / AWS 2100.
Receive Frequency: 1850 - 1910 MHz / 1710 - 1755 MHz.
Transmit Frequency: 1930 - 1990 MHz / 2110 - 2155 MHz.
RF Output Connector: 7-16 DIN Female.

Transmitter;
Frequency Accuracy: < 5 ppm.
Power Accuracy: 0.3 dB.
Frequency Step Size: 200 kHz.
Power Resolution: 0.1 dB.
Adjustable Power Range: 17 to 46 dBm × 2 (50 mW to 40 W × 2).

Receiver;
Residual Intermod Level: -122 dBm (-125 dBm Typical).
Measurement Sensitivity: -135 dBm.
Noise Floor: -136 dBm.
Reverse Power Protection: 13 dBm (20 mW) continuous.

Measurement Mode;
Measurement Method: One Port, Reverse PIM.
Real Time PIM: 3rd, 5th, 7th & 9th PIM.
Return Loss: Measured in dB.
PIM vs Time: 3rd, 5th, 7th & 9th PIM.
RX Interference: Receive Only Mode - Noise Floor Measurements.
Frequency Sweep: Frequency Response.
DAS Feature: Path Loss Characteristics.



 

Standard Calibration $1,025.00 *
*This is a Web introductory price for one calibration of the CCI PIMPRO 1921RM. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Extinction Ratio
Extinction ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage. Extinction ratio = P1/P0

Receiver
A receiver is a detector and electronic circuitry to change optical signals into electrical signals.

Telecom Bands
Optical fiber communications typically operate in a wavelength region corresponding to one of the following Bands. O Band (original): 1260–1360 nm. E Band (extended): 1360–1460 nm. S Band (short wavelengths): 1460–1530 nm. C Band (conventional): 1530–1565 nm. L Band (long wavelengths): 1565–1625 nm. U Band (ultralong wavelengths): 1625–1675 nm


Please contact us for your CCI PIMPRO 1921RM CALIBRATION and/or CCI PIMPRO 1921RM PCS 1900, AWS 2100 PIM Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: