ANRITSU MS2760A-0044 CALIBRATION and ANRITSU MS2760A-0044 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2760A-0044 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ANRITSU MS2760A-0044   Description / Specification:    
ANRITSU MS2760A-0044 44 GHz Spectrum Master USB Handheld Spectrum Analyzer

The Anritsu MS2760A-0044 Handheld USB Spectrum Master spectrum analyzer provides continuous coverage from 9 kHz to 44 GHz, positioning it perfectly for growing millimeter-wave applications like 5G, 802.11ad, satellite communications, automotive radar, and more. The MS2760A is USB-powered and controlled from a Windows-based PC, laptop, or tablet, making it uniquely flexible for use in the lab, on the manufacturing floor, or in the field.
Specifications.

Frequency.
Frequency Range: 9 kHz to 44 GHz.
Tuning Resolution: 1 Hz.
Internal 10 MHz Frequency Reference Aging: ±1.0 ppm/year
Internal 10 MHz Frequency Reference Accuracy: ±0.2 ppm (25 °C ± 25 °C) + aging.
Frequency Span: 10 Hz to 44 GHz.

Bandwidth
Resolution Bandwidth (RBW): 1 Hz to 3 MHz.
Video Bandwidth (VBW): 1 Hz to 3 MHz.
VBW/Average Type: Linear / Log.
RBW Filters: Flat Top, Nuttall.

Amplitude Ranges
Dynamic Range: > 103 dB typical at 70 GHz, 2/3 (TOI - DANL) in 1 Hz RBW.
Display Range: 1 dB to 15 dB/div in 1 dB steps, ten divisions displayed.
Reference Level Range: -120 dBm to +30 dBm.
Maximum Safe Level Input: +30 dBm CW, ±10 VDC.

Phase Noise (dBc/Hz, 20 °C to 30 °C): -116 dBc/Hz @ 10 kHz offset at 1 GHz.
Residual Spurs: -85 dBm (maximum), -95 dB (typical).
Amplitude Accuracy: ±1.8 dB (maximum), ±0.5 dB (typical).
Displayed Average Noise Level (DANL) maximum (RMS detection, VBW/Avg type = Log, IF Gain On):
   10 MHz to 644 MHz, -131 dBm;
   > 644 MHz to 4 GHz, -136 dBm;
   > 4 GHz to 40 GHz, -131 dBm;
   > 40 GHz to 44 GHz, -128 dBm.
RF In: K Connector (2.92 mm), male 50 Ω.



 



Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.


Please contact us for your ANRITSU MS2760A-0044 CALIBRATION and/or ANRITSU MS2760A-0044 44 GHz Spectrum Master USB Handheld Spectrum Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: