FLUKE 753 REPAIR and FLUKE 753 CALIBRATION

 
Custom-Cal has a high success rate in the repair of the FLUKE 753. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 753 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibrator?
Shop for Comparable Products on our
 used Calibrator page

 
   FLUKE 753   Description / Specification:    
FLUKE 753 Documenting Process Calibrator

The Fluke 753 Documenting Process Calibrator is a battery-powered, hand-held instrument that measures and sources electrical and physical parameters. It has an analog display for easy to read measurements when inputs are unstable. Thermocouple (TC) input/output jack and internal isothermal block with automatic reference-junction temperature compensation. Or manually record an external temperature reference. Test results storage and data logging. Automatically log up to 8,000 data points.
Specifications.

DC mV Measurement.
Input Impedance: >4 MΩ.
Maximum Input Voltage: 300 V, IEC 61010 300V CAT II.
Normal mode rejection: >100 dB at 50 or 60 Hz nominal.
Range / Resolution / Accuracy, (% of Reading + Floor (1 year)).
  ±100.000 mV / 0.001 mV / 0.02 % + 0.005 mV.

DC Voltage Measurement
.
Input Impedance: >4 M Ω and <100 pF.
Input Coupling: AC.
Maximum Input Voltage: 300 V, IEC 61010 300V CAT II.
Range / Resolution / Accuracy, (% of Reading + Floor (1 year)).
  ±3.00000 V / 0.00001 V / 0.02 % + 0.00005 V,
  ±30.0000 V / 0.0001 V / 0.02 % + 0.0005 V,
  ±300.00 V / 0.01 V / 0.05 % + 0.05 V.

AC Voltage Measurement.
Input Impedance: >4 M Ω and <100 pF.
Input Coupling: AC.
Maximum Input Voltage: 300 V, IEC 61010 300V CAT II.
Range 40 Hz - 500 Hz / Resolution / Accuracy, (% of Reading + Floor (1 year)).
  3.000 V / 0.001 V / 0.5 % + 0.002 V,
  30.00 V / 0.01 V / 0.5 % + 0.02 V,
  300.0 V / 0.1 V / 0.5 % + 0.2 V.

DC Current Measurement.
Maximum Input: 110 mA.
Maximum Burden Voltage: 420 mV at 22 mA.
Range / Resolution / Accuracy, (% of Reading + Floor (1 year)).
  ±30.000 mA / 1 μA / 0.01 % + 5 μA,
  ±100.00 mA / 10 μA / 0.01 % + 20 μA.

Resistance Measurement.
Open-circuit voltage: 5 V nominal.
Range / Resolution / Accuracy, (% of Reading + Floor (1 year)) / Source Current.
  10.000 Ω / 0.001 Ω / 0.05 % + 0.050 Ω / 3 mA,
  100.00 Ω / 0.01 Ω / 0.05 % + 0.05 Ω / 1 mA,
  1.0000 kΩ / 0.1 Ω / 0.05 % + 0.0005 kΩ / 500 μA,
  10.000 kΩ / 1 Ω / 0.10 % + 0.010 kΩ / 50 μA.

Frequency Measurement.
Coupling: AC.
Minimum Amplitude for Frequency Measurement (square wave):
  <1 kHz: 300 mV p-p,
  1 kHz to 30 kHz: 1.4 V p-p,
  >30 kHz: 2.8 V p-p.
Maximum input:
  <1 kHz: 300 V rms,
  >1 kHz: 30 V rms.
Input Impedance: >4 MΩ.
Range / Resolution / Accuracy, (2 year).
  1.00 Hz to 110.00 Hz / 0.01 Hz / 0.05 Hz,
  110.1 Hz to 1100.0 Hz / 0.1 Hz / 0.5 Hz,
  1.101 kHz to 11.000 kHz / 0.001 kHz / 0.005 kHz,
  11.01 kHz to 50.00 kHz / 0.01 kHz / 0.05 kHz.

DC Voltage Output.
Maximum Output Current: 10 mA.
Range / Resolution / Accuracy, (% of Reading + Floor (1 year)).
  ±100.000 mV / 1 μV / 0.01 % + 0.005 mV,
  ±1.00000 V / 10 μV / 0.01 % + 0.00005 V,
  ±15.0000 V / 100 μV / 0.01 % + 0.0005 V.

DC Current Source.
Source mA Compliance Voltage: 18 V maximum.
Source mA Open Circuit Voltage: 30 V maximum.
Range / Resolution / Accuracy, (% of Output + Floor (1 year)).
  0.100 to 22.000 mA 1 μA 0.01 % + 3 μA.

Resistance Sourcing.
Range / Resolution / Accuracy, (% of Output + Floor (1 year)) / Allowable Excitation Current.
  10.000 Ω / 0.001 Ω / 0.01 % + 0.010 Ω / 0.1 mA to 10 mA,
  100.00 Ω / 0.01 Ω / 0.01 % + 0.02 Ω / 0.1 mA to 10 mA,
  1.0000 kΩ / 0.1 Ω / 0.02 % + 0.0002 kΩ / 0.01 mA to 1.0 mA,
  10.000 kΩ / 1 Ω / 0.02 % + 0.003 kΩ / 0.01 mA to 1.0 mA.

Frequency Sourcing.
Waveform Choices: Zero-symmetric sine wave or positive 50 % duty-cycle square wave.
Square Wave Amplitude: 0.1 to 15 V p-p.
Square Wave Amplitude Accuracy, 0.01 to 1 kHz: 1 % p-p output + 75 mV, 1 kHz to 50 kHz: 10 % p-p output + 75 mV.
Sine Wave Amplitude: 0.1 to 30 V p-p.
Sine Wave Amplitude Accuracy, 0.1 to 1 kHz: 3 % p-p output + 75 mV, 1 kHz to 50 kHz: 10 % p-p output + 75 mV.
Range / Accuracy.
  Sine Wave: 0.1 Hz to 10.99 Hz / 0.01 Hz,
  Square Wave: 0.01 Hz to 10.99 Hz / 0.01 Hz,
  Sine and Square Wave: 11.00 Hz to 109.99 Hz / 0.1 Hz,
  Sine and Square Wave: 110.0 Hz to 1099.9 Hz / 0.1 Hz,
  Sine and Square Wave: 1.100 kHz to 21.999 kHz / 0.002 kHz,
  Sine and Square Wave: 22.000 kHz to 50.000 kHz / 0.005 kHz.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output


Please contact us for your FLUKE 753 REPAIR and/or FLUKE 753 Documenting Process Calibrator CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: