Keysight (Agilent) 41420A REPAIR and Keysight (Agilent) 41420A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 41420A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 41420A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Semiconductor Tester?
Shop for Comparable Products on our
 used Semiconductor Tester page

 
   Keysight (Agilent) 41420A   Description / Specification:    
Keysight (Agilent) 41420A High Power Source/Monitor Unit

The Agilent 41420A High Power Source/Monitor Unit occupies two slots in the 4142B mainframe. It sources voltage and monitors current, or sources current and monitors voltage. Separate FORCE and SENSE terminals enable Kelvin connections (remote sensing).
Specifications.

Voltage Output/Measurement Range, Resolution and Accuracy.
Range, Set resolution, Measure resolution, Accuracy, Maximum Current.
  ±2 V, 100 μV, 40 μV, ±(0.05% + 1 mV), ±1A.
  ±20 V, 1 mV, 400 μV, ±(0.05% + 10 mV), ±1A (V =< 14V)/ ±0.7A (V > 14V).
  ±40 V, 2 mV, 800 μV, ±(0.05% + 20 mV), ±350 mA.
  ±100 V, 5 mV, 2 mV, ±(0.05% + 50 mV), ±125 mA.
  ±200 V, 10 mV, 4 mV, ±(0.05% + 100 mV), ±50 mA.

Current Output/Measurement Range, Resolution and Accuracy.
Range, Set resolution, Measure resolution, Accuracy, Maximum Voltage.
  ±1 nA, 50 fA, 20 fA, ±(1% + 6 pA + 20 fA x Vout), ±200V.
  ±10 nA, 500 fA, 200 fA, ±(1% + 15 pA + 200 fA x Vout), ±200V.
  ±100 nA, 5 pA, 2 pA, ±(0.5% + 100 pA + 2 pA x Vout), ±200V.
  ±1 μA, 50 pA, 20 pA, ±(0.5% + 1 nA + 20 pA x Vout), ±200V.
  ±10 μA, 500 pA, 200 pA, ±(0.2% + 10 nA + 200 pA x Vout), ±200V.
  ±100 μA, 5 nA, 2 nA, ±(0.2% + 100 nA + 2 nA x Vout), ±200V.
  ±1 mA, 50 nA, 20 nA, ±(0.2% + 1 μA + 20 nA x Vout), ±200V.
  ±10 mA, 500 nA, 200 nA, ±(0.2% + 10 μA + 200 nA x Vout), ±200V.
  ±100 mA, 5 μA, 2 μA, ±(0.2% + 100 μA + 2 μA x Vout), ±200V(A =< 50 mA)/ ±100V(A > 50 mA).
  ±1 A, 50 μA, 20 μA, ±(0.5% + 1 mA + 20 μA x Vout), ±200V(A =< 50 mA).

Current Over-range.
1 nA-100mA range: 15% of range.
1A range: 0%.



 

Standard Calibration $475.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 41420A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your Keysight (Agilent) 41420A REPAIR and/or Keysight (Agilent) 41420A High Power Source/Monitor Unit CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: