Keysight (Agilent) N9322C CALIBRATION and Keysight (Agilent) N9322C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) N9322C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   Keysight (Agilent) N9322C   Description / Specification:    
Keysight (Agilent) N9322C 7 GHz Basic Spectrum Analyzer

The Keysight N9322C 7 GHz spectrum analyzer has an annual aging rate up to ± 0.1 ppm and the frequency drift is minimal, so measurement accuracy is finely tuned. The typical displayed average noise level of up to -152 dBm makes identifying low-level signals quick and easy. Total absolute amplitude accuracy up to ± 0.6 dB ensures you can trust power measurement results.
Specifications.

Frequency
.
Range: 9 kHz to 7 GHz.
Resolution: 1 Hz.

Frequency span (FFT and swept mode).
Range: 0 Hz (zero span), 50 Hz to 7 GHz.
Resolution: 1 Hz.
Accuracy: ± (0.22% ×span + span/(sweep point −1)), nominal.

Sweep time and triggering.
Range: 2 ms to 1000 s (Span ≥ 100 Hz), 600 ns to 1000 s (Span = 0 Hz (minimum resolution = 600 ns, when RBW ≥ 30 kHz)).
Mode: Continuous, Single.
Trigger: Free run, video, external, RF burst.

Resolution bandwidth (RBW).
Range (−3 dB bandwidth): 10 Hz to 3 MHz in 1-3-10 sequence.
Accuracy: ± 5%, nominal < 10% when RBW = 3 MHz.

Measurement range.
100 kHz to 1 MHz: Displayed average noise level (DANL) to +10 dBm, Preamp off.
1 MHz to 7 GHz: Displayed average noise level (DANL) to +20 dBm, Preamp off.
Input attenuator range: 0 to 50 dB, in 1 dB steps.

Maximum damage level.
Average contunious power: ≤ +33 dBm, 3 minutes maximum.
DC voltage: ± 50 VDC maximum.

Displayed average noise level (DANL) Preamp on, Normalized to 1 Hz.
  9 to 100 kHz: −110 dBm, nominal.
  100 kHz to 1 MHz: −131 dBm, −150 dBm typical.
  1 to 10 MHz: −148 dBm, −163 dBm typical.
  10 to 500 MHz: −161 dBm, −164 dBm typical.
  500 to 2.5 GHz: −159 dBm, −162 dBm typical.
  2.5 to 4 GHz: −158 dBm, −161 dBm typical.
  4 to 6 GHz: −155 dBm, −158 dBm typical.
  6 to 7 GHz: −150 dBm, −154 dBm typical.

Options.
N9322C-DMA, ASK/FSK Modulation Analysis.
N9322C-AMA, AM/FM Modulation Analysis.
N9322C-TMG, Time-Gated Spectrum Analysis.
N9322C-BB1, Baseband Input.
N9322C-EMC, EMI filters and quasi-peak detector.
N9322C-G01, GPIB Interface.
N9322C-MNT, Spectrum Monitor with Spectrogram Record and Playback.
N9322C-P07, Preamplifier, 7 GHz.
N9322C-PFR, Precision Frequency Reference.
N9322C-PWM, USB Average Power Sensor Support (U2000 Series).
N9322C-PWP, USB Peak and Average Power Sensor Support (U2020/U2040 X-Series).
N9322C-RM7, Reflection Measurement (requires Option TG7).
N9322C-SCN, Channel Scanner.
N9322C-SEC, Security Features.
N9322C-TG7, Tracking Generator, 7 GHz.
N9322C-TPN, Task Planner for Test Automation.
N9322C-UK6, Commercial Calibration Certificate with Test Data.



 

Standard Calibration $575.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) N9322C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.


Please contact us for your Keysight (Agilent) N9322C CALIBRATION and/or Keysight (Agilent) N9322C 7 GHz Basic Spectrum Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: