BOONTON RTP5518 CALIBRATION and BOONTON RTP5518 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BOONTON RTP5518 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our
 used RF Power Sensor page

 
   BOONTON RTP5518   Description / Specification:    
BOONTON RTP5518 18 GHz Real-Time Peak Power Sensor

The Boonton RTP5518 Real-Time Peak Power Sensor offers high video bandwidth and fast rise times. It can deliver 100,000 measurements per second, with no gaps in signal acquisition and zero measurement latency. Combining this performance with automatic pulse measurements, CCDF and crest factor statistical analysis and multi-channel capabilities.
Specifications.

RF Frequency Range: 50 MHz to 18 GHz.
Average Dynamic Range: -34 to +20 dBm.
Pulse Dynamic Range: -24 to +20 dBm.
Internal Trigger Range: -10 to +20 dBm.
Rise time (fast/slow): 5 ns/<10 μs.
Video Bandwidth: 70 MHz/350 kHz.
Single-shot Bandwidth: 35 MHz.
RF Input: Type N, 50 Ω.
VSWR:
1.15 (0.05 to 2.0 GHz);
1.28 (2.0 to 16 GHz);
1.34 (16 to 18 GHz).

Sampling Techniques: Real-time/Equivalent Time/ Statistical Sampling.
Continuous sample rate: 100 MHz.
Effective sample rate: 10 GHz.
Time Resolution: 100 ps.
Statistical Analysis: Continuous or gated CCDF.
Statistical Speed: 100M points/sec.
Trigger Sources: Internal or External TTL.
External Trigger: in/out TTL in (slave) or out (master).
Minimum Trigger: Width 10 ns.
Maximum Trigger: Frequency 50 MHz.
Trigger Jitter: 0.1 ns rms.
Trace Acquisition Speed: 100K sweeps/second.
Measurement Speed over USB: 100K meas/sec (buffered mode); 800 meas/sec (continuous).



 

Standard Calibration $275.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BOONTON RTP5518. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.


Please contact us for your BOONTON RTP5518 CALIBRATION and/or BOONTON RTP5518 18 GHz Real-Time Peak Power Sensor REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: