Keysight (Agilent) 10073C CALIBRATION and Keysight (Agilent) 10073C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 10073C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope Accessory?
Shop for Comparable Products on our
 used Oscilloscope Accessory page

 
   Keysight (Agilent) 10073C   Description / Specification:    
Keysight (Agilent) 10073C Passive Divider Probe

The Agilent 10073C passive probe has a 10:1 attenuation ratio and 2.2 M ohm input impedance, it is ideal as a general purpose, high bandwidth passive probe for the Keysight / Agilent 300 MHz - 1 GHz 6000 series, 7000, 8000 and 9000 Series oscilloscopes. The probe identification feature automatically configures the oscilloscope for the probe attenuation.
Specifications.

Propagation Delay: 7 ns (1.5 m probe cable length).
System Bandwidth: 500 MHz.
System Risetime (Calculated): 700 ps.
Attenuation Ratio: 10:1.
Input Resistance (when terminated into 1 MΩ): 2.2 MΩ.
Input Capacitance: ≈12 pF.
Maximum Input (dc + peak ac): 500 Vpk CAT I (mains isolated), 400 Vpk CAT II (post receptacle mains).
Compensation Range: 6 to 15 pF.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.


Please contact us for your Keysight (Agilent) 10073C CALIBRATION and/or Keysight (Agilent) 10073C Passive Divider Probe REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: