Keysight (Agilent) 81180B CALIBRATION and Keysight (Agilent) 81180B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 81180B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our
 used Function Generator page or new Function Generator page

 
   Keysight (Agilent) 81180B   Description / Specification:    
Keysight (Agilent) 81180B 4.6 GSa/s Arbitrary Waveform Generator

The Keysight 81180B arbitrary waveform generator provides 4.6 GSa/s, 2 GHz IQ modulation bandwidth and 12-bit vertical resolution for applications where waveform resolution is an issue.
Features.

10 MSa/s to 4.6-GSa/s sample clock control, 2 GHz IQ modulation bandwidth and 12 bit vertical resolution.
2 channel, coupled or uncoupled.
Two 2-channel systems can be synchronized to form a 4-channel system.
Interchannel skew control from -3 ns to +3 ns with 10-ps resolution.
Three software-selectable amplifiers optimized for:
  I/Q applications with 1 GHz, differential DC-coupled output;
  Maximum bandwidth and flatness for direct RF applications with AC output bandwidth to > 1.5 GHz;
  Time domain applications with low overshoot and jitter.
16 M points or 64 M points per channel.
8-bit external input for dynamic control of segments and sequences.
Advanced sequencing scenarios define stepping, looping and conditional jumps of waveforms or waveform sequences for best memory usage.
Smart trigger allows trigger hold-off and programmable pulse width.
Trigger input is programmed to wait for waveform end or abort waveform and restart.
Two markers for each channel have controlled marker positions, widths and levels.
Remote control through LAN, USB and GPIB.

Options.
216, Dual-channel instrument with 16,000,000 waveform points.
264, Dual-channel instrument with 64,000,000 waveform points.
F4G, Reconstruction filter.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


Please contact us for your Keysight (Agilent) 81180B CALIBRATION and/or Keysight (Agilent) 81180B 4.6 GSa/s Arbitrary Waveform Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: