Keysight (Agilent) U1191A CALIBRATION and Keysight (Agilent) U1191A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) U1191A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   Keysight (Agilent) U1191A   Description / Specification:    
Keysight (Agilent) U1191A 400A Handheld Clamp Multimeter

The Keysight U1191A clamp meter has a unique wire separator allows you to effortlessly isolate and perform measure­ments on individual wires in a bundle. For improved visibility when making measurements, these clamp meters also come with an easily activated built-in LED flashlight that illuminates the test area.
Specifications.

Display: 6,000 counts.
RMS method: Average responding.

DC Voltage;
 Range: 600 V, 0.1 V (Resolution), 0.5% + 3 (Accuracy).
Resistance;
 Range: 600 Ω, 0.1 Ω (Resolution), 0.8% + 5 (Accuracy).
 Range: 6 kΩ, 0.001 kΩ (Resolution), 0.8% + 3 (Accuracy).
Diode;
 Range: 1.5 V, 0.001 V (Resolution), 1.0% + 3 (Accuracy).
AC Voltage;
 Range: 600 V, 0.1 V (Resolution), 1.2% + 5 (Accuracy).
AC Current;
 Range: 400 A, 0.1 A (Resolution), 2.0% + 5 at 45 to 65 Hz (Accuracy).



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


Please contact us for your Keysight (Agilent) U1191A CALIBRATION and/or Keysight (Agilent) U1191A 400A Handheld Clamp Multimeter REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: