AIM-TTI PSA6005 CALIBRATION and AIM-TTI PSA6005 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AIM-TTI PSA6005 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   AIM-TTI PSA6005   Description / Specification:    
AIM-TTI PSA6005 6 GHz Handheld RF Spectrum Analyzer

The AIM-TTI Instruments PSA6005 is a fully portable RF spectrum analyzer that incorporates a high resolution color TFT touch screen. It is sufficiently small and lightweight to be operated as a true handheld instrument and has a battery life of more than three hours from each charge. It’s menu system provides rapid access to five menu groups, each of which has up to five sub menus, each with their own function keys. Function keys perform direct actions or create pop-up menus or dialogue boxes. Frequencies can be set by direct numeric entry, or by a digit increment system. Center, Start and Stop can be stepped by any chosen increment. Span can be zoomed in a 1-2-5 sequence.
Specifications.

Frequency Measurement.

Frequency Span;
Frequency Range: 10 MHz to 6000 MHz in one range.
Setting Modes: Center frequency plus Span, or Start frequency plus Stop frequency.
Maximum Span: 5990 MHz.
Minimum Span: 27 kHz, or Zero Span with demodulation.
Setting Resolution: 100 Hz at any frequency.
Setting Accuracy: Reference Frequency Accuracy for Start, Stop & Center (Zero-Span) frequencies.

Reference Frequency Accuracy;
Initial Accuracy: Better than ± 1 ppm at 20°C.
Stability: Better than ± 1 ppm over 10°C to 30°C.
Ageing: Better than ± 1 ppm per year.

Phase Noise;
Phase Noise Carrier at 1 GHz: Typically -99dBc/Hz at 100 kHz offset.

Resolution Bandwidth;
RBW: Selectable between 10 MHz and 300 Hz selectable in 1:3:10 sequence, or Auto.
Video Filtering: Selectable between 10 MHz and 300 Hz selectable in 1:3:10 sequence, or RBW Tracking.

Amplitude Measurement (Level).

Amplitude Range;
Display Range: 84 dB from reference level.
Measurement Units: Selectable as dBm or dBμV.
Reference Level: Selectable between -40dBm and +20 dBm (67dBμV to 127dBμV) in 1dB steps.

Amplitude Accuracy;
Calibration Level Accuracy: Better than ± 1 dB at 10dB below ref level @ 2000MHz (20°C ± 5°C)
Calibration Level Flatness: Better than ± 1 dB relative to 2000MHz the full operating frequency range.
Calibration Level Linearity: Better than ± 1 dB over 60dB range down from reference level.

Displayed Average Noise Level (DANL);
DANL: Better than - 120 dBm (-13 dBuV) average displayed noise floor (ref. level = - 40 dBm RBW = 10 kHz, VBW = 1 kHz, span 1 MHz) for frequency range 10MHz to 5.5GHz.
Noise per Hz: Better than -160 dBm/Hz equivalent.



 



Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Averaging
Averaging is a mathematical process to reduce the variation in a measurement by summing the data points from multiple measurements and dividing by the number of points summed.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your AIM-TTI PSA6005 CALIBRATION and/or AIM-TTI PSA6005 6 GHz Handheld RF Spectrum Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: