THORLABS OSA201C CALIBRATION and THORLABS OSA201C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the THORLABS OSA201C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Spectrum Analyzer, OSA?
Shop for Comparable Products on our
 used Optical Spectrum Analyzer, OSA page or new Optical Spectrum Analyzer, OSA page

As an alternative New Ridge Technologies offers the NRT-8000, the world’s Smallest Optical Spectrum Analyzer with built in “live wavelength calibration” for C-Band applications.  More
   THORLABS OSA201C   Description / Specification:    
THORLABS OSA201C 350 to 1100 nm USB Optical Spectrum Analyzer

The Thorlabs OSA201C Optical Spectrum Analyzer is a general-purpose instrument that measures optical power as a function of wavelength. It has a user friendly Graphical User Interface and can be controlled from a standard PC via High Speed USB 2.0 port. It is a Fourier Transform Optical Spectrum Analyzer (FT-OSA), which utilizes a scanning Michelson Interferometer in a push/pull configuration. This approach allows for the design of a full-featured OSA with the additional benefit of a high precision Wavelength Meter.
Specifications.

Wavelength Range: 350 - 1100 nm.
Spectral Resolution: 7.5 GHz.
Spectral Accuracy: ±2 ppm.
Spectral Precision: 1 ppm.
Wavelength Meter Resolution: 0.1 ppm, Wavelength Meter Mode Linewidth < 10 GHz.
Wavelength Meter Display Resolution: 9 Decimals, Wavelength Meter Mode Linewidth < 10 GHz.
Wavelength Meter Accuracy: ±1 ppm.
Wavelength Meter Precision: 0.2 ppm.
Input Power (Max), CW Source: 10 mW (10 dBm).
Input Damage Threshold: 20 mW (13 dBm).
Power Level Accuracy: ±1 dB.
Optical Rejection Ratio: 30 dB.
Level Sensitivity: -60 dBm/nm.



 

Standard Calibration $850.00 *
*This is a Web introductory price for one calibration of the THORLABS OSA201C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.


Please contact us for your THORLABS OSA201C CALIBRATION and/or THORLABS OSA201C 350 to 1100 nm USB Optical Spectrum Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: