Keysight (Agilent) 44472A CALIBRATION and Keysight (Agilent) 44472A REPAIR

The Keysight (Agilent) 44472A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 44472A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Data Acquisition?
Shop for Comparable Products on our
 used Data Acquisition page

 
   Keysight (Agilent) 44472A   Description / Specification:    
Keysight (Agilent) 44472A Dual 4-Ch VHF Switch Module

The Agilent 44472A VHF Switch Module provides two independent 4-to-1 coaxial multiplexers. These multiplexers are specifically designed for broadband signal switching up to 300 MHz. This module is the ideal choice for wide dynamic range measurements with spectrum and distortion analyzers. Connections to the module are made through 10 BNC (coaxial) connectors mounted directly on the 44472A. Characteristic impedance is 50 Ω. The 44472A is not recommended for use with instruments that require high DC isolation from earth ground (such as a DMM).
Specifications.

Total Channels: Dual 4 Channels.
Connector Type: BNC.
Maximum Voltage Center-Center or Center-Low: 250 V dc, 30 V ac rms or 42 V ac peak.
Maximum Voltage Low-Chassis or Low-Low: 42 V dc.
Maximum Current Per Channel: 30 mA dc, 300 mA ac rms.
Thermal Offset Per Channel: < 15 μV.
Characteristic Impedance: 50 Ω.
Initial Closed Channel Resistance: < 1 Ω.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your Keysight (Agilent) 44472A CALIBRATION and/or Keysight (Agilent) 44472A Dual 4-Ch VHF Switch Module REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: