A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEYSIGHT U1213A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.


   KEYSIGHT U1213A   Description / Specification:    
KEYSIGHT U1213A 1000A Handheld Clamp Multimeter

The Keysight U1213A handheld clamp meter comes with clamp opening of 52 mm/2 inches and high current measurement capability of up to 1000 A (AC, DC, AC+ DC). With the large jaw size, these handhelds simplify current measurements for thick cables. It provides basic functions of a multimeter with wide measurement ranges to cater for a broad range of applications (ACA, DCV, ACV, OHM, audible continuity, diode and frequency tests). These meters also provide auto-ranging capability, built-in peak hold for in-rush current measurement, temperature and capacitance measurement capability, large backlight display and one-hand operation.

DC voltage ranges: 4, 40, 400, 1000 V.
AC voltage ranges: 4, 40, 400, 1000 V.
AC+DC voltage ranges: 4, 40, 400, 1000 V.
Voltage (1 ms peak hold) ranges: 4, 40, 400, 1000 V.
Diode: check/audible continuity test.
Resistance ranges: 400, 4k, 40k, 400k, 4M, 40M ohm.
Capacitance ranges: 4, 40, 400, 4000 µF.
DC current ranges: 40, 400, 1000 A.
AC current ranges: 40, 400, 1000 A.
AC+DC current ranges: 40, 400, 1000 A.
Current (1 ms peak hold) ranges: 40, 400, 1000 A.
Temperature test Thermal type K ranges: -200 ~ -40 °C, -40 ~ 1372 °C, -328 ~ -40 °F, -40 ~ 2502 °F.
Frequency (AC coupling) ranges: 99.99, 999.9 Hz, 9.999, 99.99, 999.9 kHz.
Display: 4 digits with maximum reading 4,100 counts.
12 Segment analog bar graph and full annunciator.
Automatic polarity indication.
Connectivity: Wireless Bluetooth compatible.


Standard Calibration $135.00 *
*This is a Web introductory price for one calibration of the KEYSIGHT U1213A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.

Please contact us for your KEYSIGHT U1213A CALIBRATION and/or KEYSIGHT U1213A 1000A Handheld Clamp Multimeter REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: