KEYSIGHT U2702A CALIBRATION and KEYSIGHT U2702A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEYSIGHT U2702A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope?
Shop for Comparable Products on our
 used Oscilloscope page

 
   KEYSIGHT U2702A   Description / Specification:    
KEYSIGHT U2702A 2 Ch 200 MHz USB Modular Oscilloscope

The Keysight U2702A 100 MHz USB Modular Oscilloscope is uniquely designed to accommodate a need for flexibility with the dual-play function. This function allows you to use the oscilloscope as a standalone instrument, or to scale up the test system in a cardcage with additional scopes or with other Keysight USB modular product offerings, providing a complete solution for system development. The U2702A USB modular oscilloscope comes with standard features such as advanced triggering, automatic measurements, math functions including FTTs. A deep memory lets you to store more samples, allowing you to view the signal and results over a longer period of time. A longer capture time gives you better visibility into the cause-effect relationships in your design. The U2702A connects to the computer through Hi-Speed USB 2.0 connectivity.
Specifications.

Bandwidth (-3 dB): DC to 200 MHz.
Trigger sensitivity: < 10 mV/div: greater of 1 div or 5mV; >=10 mV/div: 0.6 div.
Real time sample rate: 2 channels interleaved 1 GSa/s, Each channel 500 MSa/s.
Sweep modes: Auto, normal, single.
Scope channels: Ch 1 and Ch 2 simultaneous acquisition.
Calculated rise time (= 0.35/bandwidth): 1.75 ns.
Range: 2 mV/div to 5 V/div (1 Mohm).
Maximum input: CAT I 30 Vrms, 42 Vpk.
Horizontal Range: 1 ns/div to 50 s/div.
Time base accuracy: 20 ppm.



 

Standard Calibration $160.00 *
*This is a Web introductory price for one calibration of the KEYSIGHT U2702A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.


Please contact us for your KEYSIGHT U2702A CALIBRATION and/or KEYSIGHT U2702A 2 Ch 200 MHz USB Modular Oscilloscope REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: