KEYSIGHT N9912A CALIBRATION and KEYSIGHT N9912A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEYSIGHT N9912A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   KEYSIGHT N9912A   Description / Specification:    
KEYSIGHT N9912A 4/6 GHz FieldFox Handheld RF Combination Analyzer

The Keysight N9912A FieldFox Handheld RF Combination Analyzer are designed to withstand your toughest working conditions. To accelerate your work, each operating mode has a task-driven user interface that saves time in the field. Step up to FieldFox - and boost your readiness. The N9912A’s base function is a cable and antenna analyzer and it can be configured to include a spectrum and transmission/reflection 1-port vector, 2-port scalar network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator and interference analyzer.
Specifications.

Frequency range: 2 MHz to 4 GHz (Option 104), 2 MHz to 6 GHz (Option 106).
Frequency reference Accuracy: ±2 ppm.
Resolution (Number of data points): 101, 201, 401, 601, 801, 1001).
Frequency Resolution: 2 MHz to 1.6 GHz, 2.5 kHz; > 1.6 GHz to 3.2 GHz, 5 kHz; > 3.2 GHz to 6 GHz, 10 kHz.
Output Power (RF Out Port) 2 MHz to 4 GHz: High;+6 dBm (nominal), Low -25 dBm (nominal).
Resolution Bandwidth (RBW) Range (-3 dB bandwidth) Zero Span: 300 Hz to 1 MHz in 1-3-10 sequence; 2 MHz.
Maximum Safe Input Level Average Continuous Power: +27 dBm (0.5 W).

Options.
104, 4 GHz cable and antenna analyzer.
106, 6 GHz cable and antenna analyzer.
010, Network analyzer time domain.
030, Remote Control Capability.
110, Transmission measurement.
111, QuickCal. 230, 4 GHz spectrum analyzer.
231, 6 GHz spectrum analyzer.
235, Preamplifier for spectrum analysis capability.
236, Interference analyzer.
302, External USB power sensor support.
303, Network analysis capability.
308, Vector voltmeter.
311, Channel power meter.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KEYSIGHT N9912A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your KEYSIGHT N9912A CALIBRATION and/or KEYSIGHT N9912A 4/6 GHz FieldFox Handheld RF Combination Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: