A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEYSIGHT N9340B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

   KEYSIGHT N9340B   Description / Specification:    
KEYSIGHT N9340B 3 GHz Handheld RF Spectrum Analyzer

The Keysight N9340B handheld spectrum analyzer (HSA) puts the speed and performance of spectrum analysis in the hands of your field engineers. It provides powerful features for field applications. Plus, the HSA’s superior performance gives you confidence in field test results while the optimized user interface enhances field productivity. A superior combination of low displayed average noise level (DANL) and single sideband (SSB) phase noise coupled with a narrow resolution bandwidth (RBW) means your signal measurements are more reliable and you will have more confidence in your test results. The N9340B’s low DANL and SSB phase noise helps you detect very low-level signals (spurs or noise) which are close to the carrier. The DANL is -124 dBm, or -144 dBm with the optional preamplifier (30 Hz RBW, 10 MHz < fc <= 1.5 GHz). The optional preamplifier adds 20 dB gain for improved analyzer sensitivity. The N9340B includes spectrogramas a standard feature. The scrolling three-dimensional display is noted for its ability to track the frequency and power behavior over the time, particularly intermittent signals.

Frequency range: 100 kHz to 3 GHz (tunable to 9 kHz), AC coupled.
Internal 10 MHz frequency reference accuracy Aging rate: ± 1 ppm / year.
Frequency readout accuracy with marker (Start, stop, center, marker) Marker resolution: ( frequency span ) / ( number of sweep points - 1).
Uncertainty: ± ( frequency indication × frequency reference uncertainty +1% × span + 20% × resolution bandwidth + marker resolution +1 Hz).
Frequency span Range: 0 Hz (zero span), 1 kHz to 3 GHz.
Frequency span Resolution: 1 Hz.
Resolution bandwidth (RBW) - 3 dB bandwidth: 30 Hz to 1 MHz, 1-3-10 sequence.
Measurement range Displayed average noise level (DANL): to +20 dBm.
Input attenuator range: 0 to 51 dB, in 1 dB steps.
Maximum safe input level Average continuous power: +33 dBm, 3 minutes maximum, 50 VDC maximum.
Sweep time Range: 10 ms to 1000 s (Span >=1 kHz), 6 µs to 200 s (Span = 0 Hz ( zero span )).
Connector and impedance: Type - N female, 50 ohm.
Display: 6.5 inch ( 170 mm ) TFT color display.

-INM, Extended spectrogram monitoring.
-XDM, Low frequency performance enhancement and xDSL measurement capability.
-IBC, low frequency performance enhancement and AM/FM In-Band On-Channel IBOCMeasurement.
-PA3, 3 GHz preamplifier.
-TG3, 3 GHz tracking generator.
-1TC, Hard transit case.
-1DN, Automotive 12 V DC charger.
-AMA, AM/FM modulation analysis.
-DMA, ASK/FSK modulation analysis.
-TAD, Adaptor Type-N(m) 50 Ohm to Type-N (f) 75 Ohm DC to 1 GHz


Standard Calibration $400.00 *
*This is a Web introductory price for one calibration of the KEYSIGHT N9340B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Averaging is a mathematical process to reduce the variation in a measurement by summing the data points from multiple measurements and dividing by the number of points summed.

Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your KEYSIGHT N9340B CALIBRATION and/or KEYSIGHT N9340B 3 GHz Handheld RF Spectrum Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: