KAELUS IBA-0790B CALIBRATION and KAELUS IBA-0790B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KAELUS IBA-0790B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   KAELUS IBA-0790B   Description / Specification:    
KAELUS IBA-0790B 832–862 MHz PIM Analyzer

The Kaelus IBA-0790B PIM Analyzer is a complete bench top and rack mounting PIM test solution used with a system controller and intuitive user software. This solution comes in model variations that cover all major commercial wireless bands. It has two test ports to support a Reverse IM measurement on either port and a forward IM measurement port-to-port. It can be fitted with optional internal DC/AISG Bias Tee.
Specifications.

System.
Measurement method: Port 1 Reverse; Port 2 Reverse; Port-to-Port Forward PIM.
Residual PIM: < -125dBm (x 2 @ 43dBm).
IM order: 3rd, 5th, 7th, 9th and 11th order.
User interface ports: 1 x USB Type B, 1 x USB Type A, 1x Monitor Port (N Female).
Bias-Tee Option: 1 x AISG / DC on 8 Pin DIN Female.
Test ports: 2 x RF Output (7-16 DIN Female).
RTF Module: RTF-1000.

Transmitter.
Transmit frequencies: 791 - 821 MHz.
Frequency increment: 100 kHz.
Frequency accuracy: ± 5ppm maximum, aging ± 1ppm maximum after first year.
Power per tone (adjustable): +20 to +44dBm | 0.1W to 25W (Effective June 28, 2018), +30 to +44dBm | 1W to 25W (Units manufactured before June 28, 2018).
Power accuracy (per tone): ± 0.35 dB.

Receiver.
Receive band (100kHz steps): 832 - 862 MHz.
Measurement noise floor: < -130 dBm (-135 dBm, typical).
Measurement range: -55 dBm to -130 dBm.



 

Standard Calibration $1,780.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KAELUS IBA-0790B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your KAELUS IBA-0790B CALIBRATION and/or KAELUS IBA-0790B 832–862 MHz PIM Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: