KEYSIGHT N5181A CALIBRATION and KEYSIGHT N5181A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEYSIGHT N5181A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   KEYSIGHT N5181A   Description / Specification:    
KEYSIGHT N5181A 1/3/6 GHz MXG RF Vector Signal Generator

The Keysight N5181A MXG RF Vector Signal Generator features fast frequency, amplitude, and waveform switching, industry-best ACPR performance, high reliability, and simplified self-maintenance - all in two rack units (2RU) - Keysight N5181A MXG vector is optimized for manufacturing cellular communications and wireless connectivity components. Keysight MXG vector provides better value for your investment by increasing throughput, improving test yield, maximizing uptime, and saving rack space. With scalable RF and baseband performance, the Keysight N5181A MXG vector is easily configured to meet your specific test needs. Features. -70 dBc ACPR for 4-carrier W-CDMA. Decrease test uncertainty in manufacturing and increase yields. Better device characterization in R&D. Arbitrary switching of frequency, amplitude, or waveforms in <= 1.2 ms. Simultaneously frequency, amplitude, and waveforms switching with list mode in <= 900 µs. Generate wide bandwidth signals up to 100 MHz. 64 MSa of memory for waveform playback. 16-bit DACs for excellent dynamic range. Hardware resampling technology eliminates need for multiple reconstruction filters. Electronic attenuator up to 6 GHz. 160 MHz I/Q modulation bandwidth.
Specifications.

Frequency Range: 100 kHz to 1 GHz (Option 501), 100 kHz to 3 GHz (Option 503), 100 kHz to 6 GHz (Option 506).
Minimum Frequency: 100 kHz.
Resolution: 0.01 Hz.
Phase Offset: Adjustable in 0.01°.
Stability, Internal Time Base Reference Oscillator Aging Rate: <= ± 5 ppm/10 yrs, < ± 1 ppm/yr.
Stability, Temperature effects: ±1 ppm (0 to 55°C).
Reference Output: Frequency 10 MHz, Amplitude >= +4 dBm (nom) into 50 ohm load.
Sweep Modes: Frequency Step, Amplitude Step and Arbitrary List.
Amplitude Output Power: -110 to +13 dBm (max).
Resolution: 0.01 dB (nom):
Step Attenuator: 0 to 130 dB in 5 dB steps, (110 dB without Option 1EQ), electronic type.

Options.
501: Frequency range from 100 kHz to 1 GHz.
503: Frequency Range from 100 kHz to 3 GHz.
506: Frequency Range from 100 kHz to 6 GHz.
UNZ: Fast Switching.
1EA: High output power.
1EQ: Low Power (<-110 dBm).
UNU: Pulse Modulation.
UNW: Narrow Pulse Modulation.
UNT: AM, FM, Phase Modulation.
006: Instrument Security.
1ER: Flexible Reference Input (1 - 50 MHz).
1EM: Move RF Output to Rear Panel.



 

Standard Calibration $540.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KEYSIGHT N5181A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your KEYSIGHT N5181A CALIBRATION and/or KEYSIGHT N5181A 1/3/6 GHz MXG RF Vector Signal Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: