FLUKE 5730A CALIBRATION and FLUKE 5730A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 5730A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibrator?
Shop for Comparable Products on our  used Calibrator page

 
   FLUKE 5730A   Description / Specification:    
FLUKE 5730A High Performance Multifunction Calibrator

The Fluke 5730A High Performance Multifunction Calibrator is designed for calibration professionals who require the most accurate dc/lf signals available in a multifunction calibrator, as well as those who simply want the best calibrator available. Metrologist’s in national laboratories, the military, third party calibration laboratories, and corporate users with high-end workload will value the performance and reliability of the 5730A. All 5730A calibrators are traceable to international standards and are produced in the factory with ISO/IEC 17025 accredited calibrations. Specifications are stated to the standard Fluke Calibration 99 % confidence level (as well as 95 % confidence level) to support easy measurement comparisons according to international quality standards. Specifications are absolute and include the uncertainty of the calibration standards used.
Specifications.

Voltage DC;
  Range: 0 to ±1100 V
  Best 1 Year, 95% Specification: 3.5 ppm + 2.5 µV.
Voltage AC;
  Range: 22 µV to 1100V, 10 Hz to 1 MHz
  Best 1 Year, 95% Specification: 42 ppm + 8 µV.
Resistance;
  Range: 0 to 100 MΩ, 18 values in x1 and x1.9
  Best 1 Year, 95% Specification: 6.5 ppm.
Current DC;
  Range: 0 to ±2.2A (0 to ±11A with 5725A; 0 to ±100 A with 52120A)
  Best 1 Year, 95% Specification: 35 ppm + 7 nA.
Current AC;
  Range: 9 µA to 2.2A, 10 Hz to 10 kHz (9 µA to ±11A with 5725A; 9 µA to ± 120 A with 52120A)
  Best 1 Year, 95% Specification: 103 ppm + 8 nA.
Wideband ac Voltage option;
  Range: 300 µV to 3.5V, 10 Hz to 50 MHz
  Best 1 Year, 99% Specification: 0.4% + 500 µV.



 

Standard Calibration $1,800.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 5730A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your FLUKE 5730A CALIBRATION and/or FLUKE 5730A High Performance Multifunction Calibrator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: