Keysight (Agilent) 54542C REPAIR and Keysight (Agilent) 54542C CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 54542C. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 54542C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope?
Shop for Comparable Products on our  used Oscilloscope page

 
   Keysight (Agilent) 54542C   Description / Specification:    
Keysight (Agilent) 54542C 4 Ch 500 MHz Digitizing Oscilloscope

The HP 54542C is a 500 MHz, 2 GSa/s sample rate, 4-channel digitizing oscilloscope. It has all of the features that you would expect in a scope plus more. Use sequential single-shot when you need to capture successive single-shot events without capturing the dead time in between. It is a great tool for applications such as pulsed laser research, high-energy physics, and pulse echo. Use glitch trigger to find the causes of anomalies in circuit operation. Trigger on hard-to-see narrow glitches down to 1 ns wide. Waveforms can be saved and time-stamped upon failure of either wave form compare or limit test. Up to 665 failures of 500 points each can be stored in multiple memory and sent to a printer, plotter, or a computer via HP-IB. Specifications. Repetitive Bandwidth: 500 MHz (equivalent time). Real-time bandwidth: 500 MHz (all channels). Number of channels (all are simultaneous acquisition): 4. Vertical sensitivity range: 1 mV/div to 5 V/div. Vertical dc gain Accuracy: ± 1.25% of full scale. Vertical resolution: 8 bits (10 bits via HP-IB with averaging). Maximum sample rate (Real time mode): 2 GSa/s (all channels). Maximum sample rate (Repetitive mode): 1 GSa/s. Waveform record length: 32,768 points (real-time), 501 points (repetitive). Maximum input: 1 M-ohm: ± 250 V (dc + ac) [ac<10 kHz], 50 ohm: 5 V rms. Time base range: 500 ps/div to 5 s/div. Resolution: 10 ps. Trigger Pulse width (minimum) 1 ns. Color Display. Opt 001 Telecommunications Mask Test Software.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 54542C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your Keysight (Agilent) 54542C REPAIR and/or Keysight (Agilent) 54542C 4 Ch 500 MHz Digitizing Oscilloscope CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: