Keysight (Agilent) 6011A CALIBRATION and Keysight (Agilent) 6011A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 6011A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) 6011A   Description / Specification:    
Keysight (Agilent) 6011A 20V 120A Single-Output Autoranging DC Power Supply

The Agilent 6011A Single-Output Autoranging Power Supply (w/o GPIB) is part of the 601x series of autoranging power supplies which provide maximum power over a wide range of voltage and current combinations without having to manually select the proper output range. Specifications. Voltage: 0 to 20 V. Current: 0 to 120 A. Maximum power: 1,072 W. Autoranging output V1, P1: 20 V, 50 A. Autoranging output V2, P2: 14 V, 76 A. Autoranging output V3, P3: 7 V, 120 A. Programming accuracy Voltage (at 25° C ±5° C): 0.035% + 15 mV. Programming accuracy Current (at 25° C ±5° C): 0.2% + 25 mA. Ripple and noise, Voltage (20 Hz to 20 MHz): 8 mV (rms), 50mV (p-p). Ripple and noise, Current (20 Hz to 20 MHz): 120 mA. Load regulation Voltage: 0.01%+ 3 mV. Load regulation Current: 0.01%+ 15 mA. Transient response time (10% step change): 2 ms. Transient response time level (10% step change): 100 mV. dc floating voltage (either terminal can be grounded or floated from chassis ground): ±240 V. Remote Sensing: Up to 2 V drop in each lead. Voltage regulation degrades for greater than 0.5 V drop. Opt 002 Provides extra programming and monitoring capabilities.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 6011A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your Keysight (Agilent) 6011A CALIBRATION and/or Keysight (Agilent) 6011A 20V 120A Single-Output Autoranging DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: