Keysight (Agilent) 6031A CALIBRATION and Keysight (Agilent) 6031A REPAIR

A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 6031A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

   Keysight (Agilent) 6031A   Description / Specification:    
Keysight (Agilent) 6031A 20V 120A Single-Output Autoranging DC Power Supply

The Agilent 6031A Single-Output Autoranging Power Supply is part of the 601x series of autoranging power supplies which provide maximum power over a wide range of voltage and current combinations without having to manually select the proper output range. Specifications. Voltage: 0 to 20 V. Current: 0 to 120 A. Maximum power: 1,072 W. Autoranging output V1, P1: 20 V, 50 A. Autoranging output V2, P2: 14 V, 76 A. Autoranging output V3, P3: 7 V, 120 A. Programming accuracy Voltage (at 25° C ±5° C): 0.035% + 15 mV. Programming accuracy Current (at 25° C ±5° C): 0.2% + 25 mA. Ripple and noise, Voltage (20 Hz to 20 MHz): 8 mV (rms), 50mV (p-p). Ripple and noise, Current (20 Hz to 20 MHz): 120 mA. Load regulation Voltage: 0.01%+ 3 mV. Load regulation Current: 0.01%+ 15 mA. Transient response time (10% step change): 2 ms. Transient response time level (10% step change): 100 mV. dc floating voltage (either terminal can be grounded or floated from chassis ground): ±240 V. Remote Sensing: Up to 2 V drop in each lead. Voltage regulation degrades for greater than 0.5 V drop. Opt 001 Front panel has only line switch, line indicator, and OVP adjust.


Standard Calibration $105.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 6031A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your Keysight (Agilent) 6031A CALIBRATION and/or Keysight (Agilent) 6031A 20V 120A Single-Output Autoranging DC Power Supply REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: