Keysight (Agilent) 6032A REPAIR and Keysight (Agilent) 6032A CALIBRATION

Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 6032A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 6032A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

   Keysight (Agilent) 6032A   Description / Specification:    
Keysight (Agilent) 6032A 60V 50A Single-Output Autoranging DC Power Supply

The Agilent 6032A Single-Output Autoranging Power Supply is part of the 601x series of autoranging power supplies which provide maximum power over a wide range of voltage and current combinations without having to manually select the proper output range. Specifications. Voltage: 0 to 60 V. Current: 0 to 50 A. Maximum power: 1,200 W. Autoranging output V1, P1: 60 V, 17.5 A. Autoranging output V2, P2: 40 V, 30 A. Autoranging output V3, P3: 20 V, 50 A. Programming accuracy Voltage (at 25° C ±5° C): 0.035% +40 mV. Programming accuracy Current (at 25° C ±5° C): 0.2% +85 mA. Ripple and noise, Voltage (20 Hz to 20 MHz): 5 mV (rms), 40mV (p-p). Ripple and noise, Current (20 Hz to 20 MHz): 25 mA. Load regulation Voltage: 0.01%+ 5 mV. Load regulation Current: 0.01%+ 10 mA. Transient response time (10% step change): 2 ms. Transient response time level (10% step change): 100 mV. dc floating voltage (either terminal can be grounded or floated from chassis ground): ±240 V. Remote Sensing: Up to 2 V drop in each lead. Voltage regulation degrades for greater than 0.5 V drop. Opt 001 Front panel has only line switch, line indicator, and OVP adjust.


Standard Calibration $80.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 6032A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your Keysight (Agilent) 6032A REPAIR and/or Keysight (Agilent) 6032A 60V 50A Single-Output Autoranging DC Power Supply CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: