Keysight (Agilent) 6203B CALIBRATION and Keysight (Agilent) 6203B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 6203B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) 6203B   Description / Specification:    
Keysight (Agilent) 6203B 7.5V 3A Single Output DC Power Supply

The HP 6203B Single Output DC Power Supply is equipped with ten-turn voltage and current controls, volt/ampere meter, meter function / range switch, and front and rear output terminals. The ten-turn current control allows the current-limit point to be set to any value within the current rating. Using these controls the CV /CC supplies can also be operated as constant-current sources. Units may be bench operated or rack mounted individually or in pairs using accessory rack mounting hardware. DC Output; 0-7.5V, 0-3A. Load effect: 5 mV. Source effect: 3 mV. PARD rms/ p-p: 200 uV/ 1 mV. Control Mode and Resolution: CV/CC, 5 mV/2 mA. Remote Control Coefficients: 200 ohm/V ±1%, 500 ohm/A ±10%. Options. Opt 011: internal overvoltage protection crowbar. Protects delicate loads against power supply failure or operator error. Opt 028: 230 Vac ± 10%, single phase input. Consists of reconnecting power transformer taps, and other components where necessary.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 6203B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your Keysight (Agilent) 6203B CALIBRATION and/or Keysight (Agilent) 6203B 7.5V 3A Single Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: