Keysight (Agilent) 6267B CALIBRATION and Keysight (Agilent) 6267B REPAIR

The Keysight (Agilent) 6267B is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 6267B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

   Keysight (Agilent) 6267B   Description / Specification:    
Keysight (Agilent) 6267B 40V 10A Single Output DC Power Supply

The HP 6267B high-performance Constant Voltage/ Constant Current employs a transistor series-regulator / triac-preregulator circuit to achieve high efficiency, excellent regulation, low ripple and noise, and moderate programming speeds in a compact full-rack width package, Separate coarse and fine voltage and current controls allow the voltage and current outputs to be varied from zero to the maximum rated value. Crossover form constant voltage to constant current operation occurs automatically when the load current exceeds the value established by the current control settings. Additional features include built-in overvoltage crowbar protection; remote error sensing; and auto-series, auto-parallel, and auto-tracking operation. The crowbar trip point adjustment and associated overvoltage indicator are conveniently located on the front panel. Auto-series, auto-parallel, and auto-tracking connections should ordinarily include no more than three supplies. Specifications. DC Outrput: 0 to 40 VDC, 0 to 10 A. Load Effect: Voltage, 0.01% + 200 uV; Current, 0.02% + 500 uA. Source Effect: Voltage, 0.01% + 200 uV; Current, 0.02% + 500 uA. PARD (rms/ p-p): Voltage, 200 uV / 10; Current, 3 mA rms. Drift (stability): Voltage, 0.03% + 2mV; Current, 0.03% + 3 mA. Load effect transient recovery: time-50 /uS, Level 10 mV. Resolution: voltage control less than 0.02%, Current control less than 0.15%. Temperature coefficient per C: 0.01% of output plus 200 /uV. Typical output impedance: 500 micro-ohm, 1 uH. Analog Meters.


Standard Calibration $80.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 6267B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your Keysight (Agilent) 6267B CALIBRATION and/or Keysight (Agilent) 6267B 40V 10A Single Output DC Power Supply REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: