Keysight (Agilent) 66103A CALIBRATION and Keysight (Agilent) 66103A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 66103A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) 66103A   Description / Specification:    
Keysight (Agilent) 66103A 35V 4.5A Single Output DC Power Module

The HP 66103A DC Power Module is for use with the 66000 modular power system mainframe. Specifications. Output Voltage: 35 V. Output Current: 4.5 A. Output Power: 150 W. Programming accuracy Voltage: 0.03% + 13 mV. Programming accuracy Current: 0.03% + 2 mA. Readback accuracy (via HP-IB or keyboard display at 25 C +/- 5 C) Voltage 0.02% + 8 mV, Current 0.02% + 2 mA. Ripple and noise (20 Hz to 20 MHz): Constant voltage rms 5 mV, peak to peak 10 mV, Constant current rms 2 mA. Line regulation voltage: 1 mV. Line regulation current: 0.1 mA. Load regulation voltage: 1 mV. Load regulation current: 0.2 mA. Transient Response Time: Less than 1 ms for the output voltage to recover within 100 mV of its previous level following any step change in load current up to 10 percent of rated current. Isolation: Output terminals can be up floated to ± 240 Vdc from chassis ground. Remote Sensing: Up to half the rated output voltage can be dropped across in each load lead. Add 2 mV to the voltage load regulation specification for each 1-V change in the negative output lead caused by a load current change. Command Processing Time: The average time for the output voltage to change after getting an HP-IB command is 20 ms. Output programming Response Time (with full resistive load) : The rise and fall time (10% to 90% and 90% to 10%) of the output voltage is less tban 20 ms. The output voltage change settles within 1 LSB (0.025% x rated voltage) of the final value in less than 120 ms. Down-Programming: An active down-programmer sinks approximately 10% of the rated output current. Agilent 66103A Options. Opt 760: Open/Close and Polarity Reversal Relays.



 

Standard Calibration $190.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 66103A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your Keysight (Agilent) 66103A CALIBRATION and/or Keysight (Agilent) 66103A 35V 4.5A Single Output DC Power Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: