Keysight (Agilent) 66105A CALIBRATION and Keysight (Agilent) 66105A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 66105A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) 66105A   Description / Specification:    
Keysight (Agilent) 66105A 120V 1.25A Single Output DC Power Module

The Agilent 66105A DC Power Plug-in Module's output is designed for automated testing that helps meet changing requirements in ATE and production test with a modular design that conserves rack space and simplifies system cabling and assembly. The Agilent 66105A is used with the 66000A mainframe. Specifications. Output voltage: 0 to 120 V. Output current: 0 to 1.25 A. Maximum power: 150 W. Programming accuracy at 25 °C ± 5 °C: Voltage 0.03% + 54 mV, Current 0.03% + 0.6 mA. Readback accuracy (via GPIB or keyboard display at 25 °C ± 5 °C): Voltage 0.02% + 32 mV, Current 0.02% + 0.6 mA. Ripple and noise from 20 Hz to 20 MHz Constant voltage: rms 18 mV, peak-to-peak 25 mV. Ripple and noise from 20 Hz to 20 MHz Constant current: rms 1 mA. Line regulation: Voltage 3 mV, Current 50 µA. Load regulation: Voltage 4 mV, Current 50 µA. Transient response time: Less than 1 ms for the output voltage to recover within 100 mV of its previous level following any step change in load current up to 10 percent of the power module rated output current. OVP accuracy (characteristic): 250 mV. Options. Opt 760, Adds isolation/polarity relays. Opt J17, External monitor.



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 66105A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your Keysight (Agilent) 66105A CALIBRATION and/or Keysight (Agilent) 66105A 120V 1.25A Single Output DC Power Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: