Keysight (Agilent) 66321B CALIBRATION and Keysight (Agilent) 66321B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 66321B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) 66321B   Description / Specification:    
Keysight (Agilent) 66321B Single-Output Mobile Communication DC Source

The Agilent 66321B Single Output Mobile Communications DC Source offers a built-in advanced measurement system to accurately measure battery current drains when the device operates in different modes (such as talk mode, active mode, standby mode, and off/sleep mode). Measurements made during these modes are critical for ensuring that your devices are operating properly and that you are getting the most out of the battery. The Agilent 66321D is recommended when you need to provide power as a replacement to your device’s main battery during testing. Specifications. Voltage: 0 to 15 V. Current: 0 to 3 A. Peak current for up to 7 ms: 5 A. Programming accuracy at 25°C ±5°C (% of setting plus fixed): Voltage 0.05% + 10 mV, Current 0.05% + 1.33 mA. Ripple and Noise (20 Hz to 20 MHz): Voltage rms 1 mV (peak-to-peak 6 mV), Current rms 2 mA. DC measurement accuracy: Voltage 0.03% + 5 mV, -3 A to + 5 A 0.2% 0.5 mA, -1 A to + 1 A 0.1% 0.2 mA, 20 mA to + 20 mA range 0.1% + 2.5 µA. Dynamic measurement system: Buffer size 4096 points, Sampling interval 15 µs - 31,200 s. Transient response time <20 µs. Programmable output resistance: Range 40 m-Ohm to 1 Ohm, Programming accuracy 0.5% + 2 m-Ohm. Voltmeter input: -25 to +25 Vdc. DC readback accuracy (at 25°C ±5°C): 0.04% + 5 mV. AC + DC readback accuracy (at 25°C ±5°C) with DC plus a sinewave input > 25 mV rms: 1% + 5 mV (60 Hz to 10 kHz). Command Processing Time: Average time required for the output voltage to begin to change following receipt of GPIB data is 4 ms (with display disabled). Options. Opt 004; Make "Hi Compensation Mode" as default setting. Opt 007; Extra 5-pin output connectors (2 x p/n 0360-2604. Opt 052; 14565A Device Characterization Software. Opt 053; Add 14565A Device Characterization Software with Battery Drain Analysis. Opt 100; 87 to 106 Vac, 47 to 63 Hz. Opt 220; 191 to 233 Vac, 47 to 63 Hz. Opt 230; 207 to 253 Vac, 47 to 63 Hz. Opt 8ZL; Include feet.



 

Standard Calibration $190.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 66321B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your Keysight (Agilent) 66321B CALIBRATION and/or Keysight (Agilent) 66321B Single-Output Mobile Communication DC Source REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: