Keysight (Agilent) 6654A REPAIR and Keysight (Agilent) 6654A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 6654A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 6654A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) 6654A   Description / Specification:    
Keysight (Agilent) 6654A 60V 9A Single Output System DC Power Supply

The Agilent 6654A is a 0-60 VDC / 0-9 A, Single-Output, Remote Sensing, (GPIB) Power Supply. Features, DC Floating Voltage: Output terminals can be floated up to ±240 Vdc from chassis ground. Remote Sensing: Up to half the rated output voltage can be dropped in each load lead. The drop in the load lead subtracts from the voltage available for the load. Add 3 mV to the voltage load regulation specification for each 1-V change in the positive output lead due to load current change. Command Processing Time: Average time required for the output voltage to begin to change following receipt of digital data is 20 ms for the power supplies connected directly to the HP-IB. Output Programming Response Time: The rise and fall time (10/90% and 90 / 10%) of the output voltage is less than 15 ms. The output voltage change settles within 1 LSB (0.025% x rated voltage) of final value in less than 60 ms. Modulation: (Analog programming of output voltage and current). Input Signal: 0 to -5V. Input Impedance: 10 k Ohm nominal. Input Power: 1.380 VA, 1,100 W at full load; 120 W at no load. Specifications. Output voltage: 0 to 60 V. Output current: 0 to 9 A. Programming accuracy (at 25° C ±5° C) Voltage: 0.06% + 26 mV. Programming accuracy (at 25° C ±5° C) Current: 0.15% + 8 mA. Ripple and noise (from 20 Hz to 20 MHz) Constant Voltage: 500 µV (RMS), 5 mV (peak-peak). Ripple and noise (from 20 Hz to 20 MHz) Constant Current: 3 mA (RMS). Readback accuracy at 25° C ±5° C: Voltage 0.07% + 40 mV / +Current 0.15% + 7 mA / -Current 0.35% + 15 mA. Load Regulation: Voltage 4 mV / Current 0.5 mA. Line Regulation: Voltage 1 mV / Current 0.5 mA. Transient Response Time: Less than 100 µs for the output voltage to recover to its previous level (within 0.1 % of the voltage rating of the supply or 20 mV, whichever is greater) following any step change in load current of up to 50% of rated current.



 

Standard Calibration $145.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 6654A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your Keysight (Agilent) 6654A REPAIR and/or Keysight (Agilent) 6654A 60V 9A Single Output System DC Power Supply CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: