Keysight (Agilent) 71604B CALIBRATION and Keysight (Agilent) 71604B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 71604B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Pattern Generator?
Shop for Comparable Products on our
 used Pattern Generator page

 
   Keysight (Agilent) 71604B   Description / Specification:    
Keysight (Agilent) 71604B Pattern Generator, MMS

The HP 71604B pattern generator consists of pattern generator and synthesized clock source modules configured in the HP 70000 modular measurement system (MMS). The HP 71604B covers the range from 100 Mb/s to 3 Gb/s and features standard pseudo-random test patterns up to 2^31 - 1 bits long. Users can program and run variable length test patterns from 1 bit to 4 Mbs long or create two equal length patterns up to 2 Mbs long and switch seamlessly between them. User-programmable patterns are created using the screenbased ed itor or are transferred to the pattern generator on an MS-DOS format, 3 1/2,-in floppy disk. dc-coupled, closely-matched complementary clock and data outputs simplify connection to highspeed logic devices. Bit Rate: 100 Mb/s to 3 Gb/s; resolution 1 Hz. Rise Time (20% to 80%): <90 ps. Patterns: 2^31 -1, 2^23 -1, 2^15 -1, 2^10 -1, 2^7 -1; zero substitution variable mark density patterns; variable length user patterns from 1 bit to 4 Mbits. Data and Data Outputs: ECL or variable 0.25 V to 2 V p-p amplitude into 50 ohm, high level + 1 V to -3.75 V. Clock/Data Delay: ± 1 ns; resolution 1 ps.



 

Standard Calibration $935.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 71604B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.


Please contact us for your Keysight (Agilent) 71604B CALIBRATION and/or Keysight (Agilent) 71604B Pattern Generator, MMS REPAIR

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: