Keysight (Agilent) 8114A CALIBRATION and Keysight (Agilent) 8114A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8114A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Pulse Generator?
Shop for Comparable Products on our  used Pulse Generator page or new Pulse Generator page

 
   Keysight (Agilent) 8114A   Description / Specification:    
Keysight (Agilent) 8114A Programmable Pulse Generator

The Agilent 8114A 100 Volt 2 Amp pulse generator helps you maximize test efficiency as the key to reducing time to market without compromising the quality of your product. It shortens characterization and test time by providing: clean, reliable and repeatable pulse waveforms, easy set-up and operation, full programmability and protection of the device under test. The Agilent 8114A generates clean pulses with low jitter and excellent pulse performance at all specified settings in any triggering mode and, of course, across the entire operating temperature range. Parameters and trigger modes can be changed without generating unwanted pulses, so that reliable measurements are guaranteed. As well as generating continuous streams of pulses, the Agilent 8114A can be triggered or gated by an external signal or the MANual trigger key. With the Agilent 8114A you can set the pulse levels in terms of voltage or current, to suit the device you are testing. Pulse Performance; Overshoot/Preshoot/Ringing: < 5% of amplitude ±100 mV. Setting Time: < 100 ns typical. Transition Times (10/90% amplitude): 50 ohm into 50 ohm: < 7 ns (amplitude > 5 V); High-Z into 50 ohm: < 12 ns. Timing Parameters; Measured at 50% of amplitude with 50 ohm source impedance into 50 ohm load. Period: 66.7 ns to 999 ms (Frequency: 1.00 Hz to 15 MHz). Period Accuracy: ± 5% ± 100 ps. Period Resolution: 3 digits best case 100 ps. Width: 10.0 ns to 150 ms. Duty Cycle: 0.1 % to 100% (maximum duty cycle limited for amplitude > 20 V, worst case 15%). Duty Cycle Accuracy: ± 5% ± 500 ps. Duty Cycle Resolution: 3 digits best case 100 ps. Delay: 0.00 ns to 999 ms (maximum value = period – 4 ns). Delay Accuracy: ± 5% ± 1 ns. Delay Resolution: 3 digits best case 100 ps. Fixed Delay: 42 ns (trigger output to output) typical. Double Pulse: (Delay and Double-Pulse are mutually exclusive) 20.0 ns to 999 ms, minimum period 133 ns. Resolution: 3 digits best case 100 ps. Options. Option 001: Variable Baseline ± 25 V. Option UFJ: 1 MB Memory Card. Opt UN2: Rear Panel Connectors (instead of front panel).



 

Standard Calibration $480.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8114A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your Keysight (Agilent) 8114A CALIBRATION and/or Keysight (Agilent) 8114A Programmable Pulse Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: