Keysight (Agilent) 81532A REPAIR and Keysight (Agilent) 81532A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 81532A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 81532A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Sensor?
Shop for Comparable Products on our  used Optical Power Sensor page or new Optical Power Sensor page

 
   Keysight (Agilent) 81532A   Description / Specification:   Spec Sheet 
Keysight (Agilent) 81532A 800 to 1700 nm InGaAs Optical Power Sensor Module

The Agilent 81532A Power Sensor Module (plug-in) is used with an Agilent Lightwave Multimeter mainframe. Specifications. Sensor Element: InGaAs. Wavelength Range: 800 to 1700 nm. Power Range: +3 to -110dBm, Uncertainty (Accuracy) at Reference Conditions: ± 2.5% (1000 to 1650 nm). Total Uncertainty: ± 5% ± 0.5 pW (1000 to 1650 nm). Linearity (Power) 18° to 28°C. Constant Temperature: 0 to-90 dBm, ±0.015 dB. ±0.3 pW. Noise (Peak-to-Peak) (Avg. Time 1 second): <0.5pW (1200 to 1600 nm). Supplementary Performance Characteristics. Add 1 % to total uncertainty for full wavelength range. Outside the specified wavelength range, the noise will increase by up to five times the values stated. Analog Output. Bandwidth: >= DC , <= 300 to 4000 Hz, depending on range and sensor module. Output Voltage: 0 to 2 V into open. Output Impedance: 600 ohms typical. Maximum Input Voltage: ±10 V.



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 81532A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your Keysight (Agilent) 81532A REPAIR and/or Keysight (Agilent) 81532A 800 to 1700 nm InGaAs Optical Power Sensor Module CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: