Keysight (Agilent) 8158B REPAIR and Keysight (Agilent) 8158B CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8158B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8158B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Attenuator?
Shop for Comparable Products on our  used Optical Attenuator page or new Optical Attenuator page

 
   Keysight (Agilent) 8158B   Description / Specification:    
Keysight (Agilent) 8158B Variable Optical Attenuator

The HP 8158B Optical Attenuator is a fully programmable and highly flexible test instrument. Due to its state-of-the-art fiberless design, all applications employing fibers with a numerical aperture up to 0.3 are covered with one instrument. Multimode and single-mode measurements can thus be easily performed. Specifications. Wavelength Range: 600-1200 nm (opt. 001), 1200-1650 nm (opt. 002) Applicable Fiber Type: all fiber types with an NA:<= 0.3. Attenuation Range (excluding insertion loss: 60.00 dB. Linearity: < ±0.4 dB for single-mode, < ±0.2 dB for multimode. Return loss (incl. connectors): 14dB. Display range: 0.00 to 64.00 dB. Display resolution: 0.01 dB (min. step size). Repeatability (of attenuation after a max. of 6 matings with same connector): single-mode (9/um): <0.2dB. Options. Opt. 001: 600-1200 nm. Opt. 002: 1200-1650 nm. Opt. 011: Diamond HMS-10/ HP connector. Opt. 012: FC/ PC connector. Opt. 013: DIN 47256 connector. Opt. 014: ST connector.



 

Standard Calibration $255.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8158B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your Keysight (Agilent) 8158B REPAIR and/or Keysight (Agilent) 8158B Variable Optical Attenuator CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: